The 2025 Can-Am Origin has 4 recalls, the most serious being front brake failure and a high-voltage battery fire risk that can occur even while the motorcycle is parked and turned off.
On the brake side, the front brake caliper support can crack and fail, causing the front brake to stop working entirely. Without front braking, stopping distances extend significantly and the rider loses a primary means of slowing the motorcycle. On the battery side, a breather valve that fails to seal properly lets moisture into the high-voltage battery pack. Water inside the battery can cut drive power without warning while riding, and the same moisture can cause the battery to overheat and catch fire whether the motorcycle is in motion or sitting parked.
At a glance
What can fail
The front brake caliper support may fail under certain conditions, which could cause the front brakes to stop working or brake less effectively.
What the fix does
A reinforcement kit will be installed on the front brake caliper support at a dealership to strengthen it.
Summarized — see the official notice for exact wording, dates, and contacts.
We may earn a commission for purchases made through these links.
At a glance
What can fail
The front brake caliper support can develop fatigue cracks and break, which may cause the front brakes to stop working.
What the fix does
BRP will install a reinforcement kit on the brake caliper support at no cost to strengthen it.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The breather valve may fail to seal properly, allowing moisture or water to enter the high voltage battery.
What the fix does
Dealers will install a new protection plate or replace the breather valve at no cost.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The breather valve on the high-voltage battery may not seal properly, allowing water to enter the battery. This could cause loss of wheel power or battery overheating.
What the fix does
A dealer will inspect the breather valve and replace it if needed, then install a new battery housing protection plate.
Summarized — see the official notice for exact wording, dates, and contacts.
