The 2007 Johnny Pag Spyder 300 has 4 recalls, the most serious involving a shift linkage that can break and leave the rider unable to change gears, raising the risk of a crash depending on traffic and road conditions.
Two recalls relate to lighting. The headlamp system can leave only a small interior bulb lit when the headlamp switch is turned off while the ignition remains on, meaning the motorcycle may not be as visible to other road users as required. The taillight assembly on certain bikes has not been tested to the required standard, and a dimmer-than-required brake and tail lamp can make it harder for following drivers to see the motorcycle or recognize when the rider is braking. There is also a label recall: the compliance sticker incorrectly lists a gross axle weight rating of 195 kg instead of the correct 180 kg, and loading the motorcycle based on that figure could affect its handling.
At a glance
What can fail
The shift linkage can break on certain motorcycles. If this happens, you won't be able to shift gears properly, which could make it harder to control the bike in traffic.
What the fix does
Dealers will replace your shift linkage with an updated version.
Summarized — see the official notice for exact wording, dates, and contacts.
We may earn a commission for purchases made through these links.
At a glance
What can fail
When the ignition is on and headlamp switch is off, only a small bulb lights instead of the full headlamp. This reduces visibility to other drivers and pedestrians during the day, increasing crash risk.
What the fix does
Dealers will update the headlamp wiring to ensure proper illumination.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The compliance label shows an incorrect Gross Axle Weight Rating of 195kg when it should be 180kg, which could lead to overloading and poor handling.
What the fix does
Dealers will install a corrected compliance label with the accurate weight rating.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The taillight assembly lacks required safety markings and hasn't been tested, potentially resulting in insufficient brightness that reduces visibility to following drivers, especially at night.
What the fix does
Dealers will replace the taillight assembly with one that meets safety standards.
Summarized — see the official notice for exact wording, dates, and contacts.
