The 1991 Pontiac Firebird has 4 recalls, the most serious being cracked or pinhole-damaged fuel filler neck solder joints that can leak fuel and, near any ignition source, start an engine fire.
Two recalls address the front seatbelt latch plates, which may fail to engage the buckle properly or only connect after forcing or wiggling the latch into place. In either case, a buckle that isn't fully locked can release during a sudden stop or collision, leaving the occupant unrestrained at the moment protection is most needed. There is also a windshield bonding concern: poor adhesion between the glass and its mounting means the windshield can separate from the vehicle body in a collision, which raises the risk of an unbelted occupant being ejected through the opening.
At a glance
What can fail
The solder joint where the fuel filler neck connects to the tank can develop cracks or small holes. This may cause fuel odor or leaks, which could lead to fire if ignited.
What the fix does
The fuel tank will be inspected for leaks and replaced if necessary.
Summarized — see the official notice for exact wording, dates, and contacts.
We may earn a commission for purchases made through these links.
At a glance
What can fail
Seat belt latch plates may fail to engage with the buckle, or require wiggling and forcing to lock into place.
What the fix does
Technicians will inspect the safety belt assemblies and replace faulty retractor-side belts with latch plates as needed.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The metal latch plates on safety belts may fail to properly engage the buckle assemblies, creating an unlocked condition. Seat occupant movement could then cause the latch plate to release from the buckle.
What the fix does
Replace the safety belt retractor assembly (front and rear in coupes; front only in convertibles).
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The windshield adhesive bond is weak, which could cause the windshield to separate from the vehicle during a collision.
What the fix does
Remove the old adhesive and sealant from the windshield and mounting, apply new bonding material, and reinstall the windshield.
Summarized — see the official notice for exact wording, dates, and contacts.
