At a glance
What can fail
Oil can leak from the PTO pressure switch onto the thermal blanket covering the exhaust system.
What the fix does
Dealers will install a new pressure switch kit that relocates the switch away from the exhaust system.
The 2010 Ford F-450 SD has 3 recalls, all centered on the same fire risk: a power take-off pressure switch that can leak oil onto the exhaust's thermal blanket, where heat from the exhaust can ignite it.
These trucks were modified by third-party upfitters and fitted with Muncie Power Products power take-off assemblies, which are mechanical systems that draw engine power to run equipment like dump beds or service cranes. The pressure switch on these assemblies can seep oil, and because that oil drips onto the insulating blanket wrapped around the exhaust, the material can absorb enough fluid to catch fire from the exhaust heat beneath it. The defect was filed by multiple upfitters who installed the same underlying equipment, but the problem in every case is identical: the switch was never actually connected to the vehicle's operating systems, meaning it served no function and can simply be removed and plugged off without affecting how the truck works. All three recalls involve the same repair approach, covering vehicles that passed through different modification shops before reaching their owners.
At a glance
What can fail
Oil can leak from the PTO pressure switch onto the thermal blanket covering the exhaust system.
What the fix does
Dealers will install a new pressure switch kit that relocates the switch away from the exhaust system.
We may earn a commission for purchases made through these links.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
Oil can leak from the PTO pressure switch onto the thermal blanket covering the exhaust system in affected vehicles.
What the fix does
Dealers will install a new pressure switch kit that relocates the switch away from the exhaust system.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The Muncie PTO pressure switch may be defective. This unused switch was installed in a location that could cause failure.
What the fix does
A new pressure switch kit will be installed that relocates the switch away from the exhaust system.
Summarized — see the official notice for exact wording, dates, and contacts.