Recalls 1 and 3 describe the same ignition switch defect. I'll treat those as a single issue and present two distinct problems total.
The 1997 Honda Accord has 3 recalls, the most serious being a front suspension ball joint that can wear out and separate, causing the suspension to collapse and leaving the driver with drastically reduced steering control.
The ignition switch carries a separate concern: electrical contacts inside the switch can degrade over time from the current passing through them during startup. Once worn enough, the contacts can cause the engine to stall without warning while driving, with no indication beforehand that the failure is coming.
At a glance
What can fail
Electrical contacts in the ignition switch can wear down from high current during engine startup, causing the engine to stall without warning.
What the fix does
The ignition switch will be replaced.
Summarized — see the official notice for exact wording, dates, and contacts.
We may earn a commission for purchases made through these links.
At a glance
What can fail
The electrical contacts inside the ignition switch can wear down from the high electrical current that flows through it when you start the vehicle.
What the fix does
Your dealer will replace the ignition switch at no cost. Contact Honda at 1-800-999-1009 or Acura at 1-800-382-2238 if service is delayed.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
The front suspension lower ball joints can wear out prematurely and may separate, causing the front suspension to collapse.
What the fix does
Dealers will replace the front suspension lower ball joints.
Summarized — see the official notice for exact wording, dates, and contacts.
