The 1992 Mitsubishi Montero has 3 recalls, the most serious being front brake hoses that can crack when the wheels are turned to full lock with the suspension fully compressed, leaking brake fluid and reducing stopping power.
When the front suspension reaches its limits during hard turns or off-road articulation, the brake hoses at the front wheels flex to a point where the rubber can split. Once the hose cracks, brake fluid escapes, the brake warning light comes on, and the vehicle takes longer to stop. On the engine side, the bolt that holds the crankshaft pulley in place can work loose, allowing the pulley to drop off entirely. On 3.0L-equipped Monteros, that pulley drives the power steering pump, so losing it means the steering suddenly becomes much heavier and harder to control, especially at low speeds or during parking maneuvers.
At a glance
What can fail
The bolt that secures the crankshaft pulley can loosen, causing the pulley to separate and fall off the engine.
What the fix does
Dealers will install an improved bolt on older Mirage engines, tighten the bolt to proper specifications on all vehicles, and replace any damaged bolts.
Summarized — see the official notice for exact wording, dates, and contacts.
We may earn a commission for purchases made through these links.
At a glance
What can fail
When the steering is turned fully and suspension is fully compressed, the left or right front brake hose can crack, causing brake fluid to leak.
What the fix does
Dealers will replace both front brake hoses with redesigned hose assemblies.
Summarized — see the official notice for exact wording, dates, and contacts.
At a glance
What can fail
Under extreme steering and suspension movement, the front brake hoses can crack and leak brake fluid.
What the fix does
Dealers will replace both front brake hoses with new, improved hose assemblies.
Summarized — see the official notice for exact wording, dates, and contacts.
