Ford Motor Company (Ford) is recalling certain model year 2011 Ford E-150, E-250, E-350, and E-450 vehicles built from May 12, 2011, through May 26, 2011. Due to improper manufacturing conditions, some of the windshields may form bubbles after an extended time in hot temperatures. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 205, "Glazing Materials."
Safety Risk
The presence of bubbles may hinder driver's visibility thereby increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will inspect and replace the windshield if bubbles are present, free of charge. The recall began in January 2014. Owners may contact the Ford customer relationship center at 1-866-436-7332. Ford's recall campaign number is 11C20.
BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 AND X6 SPORT ACTIVITY VEHICLES MANUFACTURED BETWEEN DECEMBER 14, 2009 AND DECEMBER 16, 2009. IN THE UPPER RIGHT AREA OF THE WINDSHIELD, BONDING MAY BE INSUFFICIENT OVER A LENGTH OF APPROXIMATELY 50CM.
Safety Risk
IN THE CASE OF A ROLLOVER, THE STABILITY OF THE ROOF COULD BE AFFECTED INCREASING THE RISK OF INJURIES.
Remedy
BMW WILL NOTIFY OWNERS AND AUTHORIZED DEALERS WILL REMOVE THE WINDSHIELD AND THEN REINSTALL WITH THE PROPER BONDING FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 30, 2010. OWNERS MAY CONTACT BMW AT 1-800-525-7417.
CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING.' THE WINDSHIELD MAY NOT BE PROPERLY SECURED TO THE VEHICLE BODY.
Safety Risk
IF THE WINDSHIELD IS NOT PROPERLY RETAINED TO THE VEHICLE, WIND NOISE, SQUEAK/RATTLES AND/OR WATER LEAKS MAY OCCUR. ALSO, LOSS OF WINDSHIELD RETENTION MAY REDUCE OCCUPANT PROTECTION IN THE EVENT OF A CRASH.
Remedy
DEALERS WILL REPLACE THE WINDSHIELD FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 22, 2006. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING.' THE WINDSHIELD URETHANE BEAD MAY NOT HAVE ADHERED TO THE BODY IN CERTAIN AREAS DURING THE CURE PROCESS.
Safety Risk
IF A CRASH OCCURS, THE WINDSHIELD MAY NOT BE RETAINED, INCREASING THE RISK OF INJURY TO A VEHICLE OCCUPANT.
Remedy
DEALERS WILL REPLACE THE WINDSHIELD FREE OF CHARGE. THE RECALL BEGAN ON MARCH 10, 2005. OWNERS MAY CONTACT BUICK AT 1-866-608-8080, CHEVROLET AT 1-800-630-2438, OR GMC AT 1-866-996-9463.
CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING." THE WINDSHIELDS MAY POTENTIALLY EXHIBIT INCREASED WIND NOISE, WATER LEAKAGE, AND SQUEAKS AND RATTLES.
Safety Risk
POTENTIAL LOSS OF WINDSHIELD RETENTION MAY ALSO REDUCE OCCUPANT PROTECTION IN THE EVENT OF A CRASH.
Remedy
DEALERS WILL REPLACE THESE WINDSHIELDS. OWNER NOTIFICATION BEGAN ON MARCH 31, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD/MERCURY AT 1-800-392-3673.
CERTAIN PICKUP TRUCKS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING." SOME OF THESE VEHICLES LACK A CONTINUOUS URETHANE BONDING BEAD BETWEEN THE BODY SURFACE AND THE WINDSHIELD.
Safety Risk
IN VEHICLES WITH THIS CONDITION, THE WINDSHIELD MAY NOT BE RETAINED IN ACCORDANCE WITH THE SAFETY STANDARD DURING A VEHICLE CRASH.
Remedy
DEALERS WILL REMOVE, RESEAL, AND REINSTALL THE WINDSHIELD. OWNER NOTIFICATION BEGAN ON JANUARY 28, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.
THE TOP COAT PAINT SEVERELY PEELS DUE TO OVERBAKING OF THE POWDER PRIMER PRIOR TO THE TOP COAT APPLICATION. SINCE THE WINDSHIELD PRIMER AND ADHESIVE ADHERE TO THE TOP COAT PAINT ONTHE WINDSHIELD OPENING FLANGE, THE WINDSHIELD DOES NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING."
Safety Risk
IN THE EVENT OF A VEHICLE CRASH, THE WINDSHIELD MAY NOT STAY IN PLACE AS REQUIRED BY FMVSS NO. 212.
Remedy
ALL VEHICLES HAVE BEEN REPURCHASED. THIS CAMPAIGN IS 100%.
THE GLASS TEMPERING PROCESS ON THE RIGHT HAND REAR DOOR WINDOWS WAS NOT CORRECTLY PERFORMED. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 205, "GLAZING MATERIALS."
Safety Risk
CONSEQUENCE OF NON-COMPLIANCE: IF THE WINDOW BREAKS, THE GLASS FRAGMENTS OF THE REAR WINDOWS EXCEED THE SIZE SPECIFICATIONS OF FMVSS NO. 205.
POOR BOND ADHESION BETWEEN THE WINDSHIELD GLASS AND THE MOUNTING, WHICH COULD ALLOW THE WINDSHIELD TO SEPARATE FROM THE VEHICLE DURING A COLLISION. THIS FAILS TO CONFORM WITH FMVSS 212.
Safety Risk
IF WINDSHIELD SEPARATION OCCURS IN A COLLISION, ANUNBELTED OCCUPANT COULD BE EJECTED FROM THE VEHICLE, AND PERSONAL INJURY COULDOCCUR.
Remedy
REMOVE ALL SEALER FROM WINDSHIELD AND MOUNTING; APPLY NEW BONDING AND SEALANT MATERIAL, AND REINSTALL WINDSHIELD.
POOR ADHESION MAY OCCUR BETWEEN PAINT LAYERS IN THE WINDSHIELD MOUNTING AREA DUE TO DEFECTIVE PAINT BATCHES OR OVERSPRAYING.
Safety Risk
PAINT SEPARATION IN THE WINDSHIELD AREAS WOULD LEADTO NON-COMPLIANCE WITH FMVSS 212 RETENTION REQUIREMENTS. LOSS OF WINDSHIELDRETENTION ABILITY COULD CAUSE WINSHIELD TO SEPARATE FROM VEHICLE WITHOUT WARNINGAND HARM VEHICLE OCCUPANTS AND OTHERS IN THE VICINITY.
USE OF IMPROPER PRIMER ON METAL SURFACES OF WINDSHIELD AND SIDE WINDOW OPENINGS COULD CAUSE LOW ADHESION TO THE METAL SURFACE AND WOULD NOT PROVIDE RETENTION REQUIRED BY FMVSS 212.
Safety Risk
WINDSHIELD AND SIDE WINDOW GLASS WOULD NOT PREVENT THEEJECTION OF VEHICLE OCCUPANTS DURING A VEHICLE CRASH, WHICH CAUSES SERIOUSINJURIES AND FATALITIES.
