The 2000 Triumph TT600 has two recalls, the more serious being sprag housing bolts that can loosen and cause engine damage or a sudden driveline seizure, which can cause the rider to lose control.
The second recall involves the side stand mounting bracket, which can work loose due to insufficient torque at installation. If the bracket shifts or detaches, the side stand may no longer support the motorcycle when parked, creating a tip-over risk.
At a glance
What can fail
Bolts holding the sprag housing may loosen, potentially causing engine damage and driveline failure.
What the fix does
The sprag housing bolts will be replaced.
Summarized — see the official notice for exact wording, dates, and contacts.
We may earn a commission for purchases made through these links.
At a glance
What can fail
The side stand mounting bracket can loosen because it was not tightened to the correct tension. If it loosens, the side stand may not hold the motorcycle upright properly.
What the fix does
The bracket fasteners will be retightened to the correct tension. If either fastener needs more than one full turn to tighten, both will be replaced.
Summarized — see the official notice for exact wording, dates, and contacts.
