On certain motorcycles, two (2) bolts of incorrect length were fitted to the front caliper. Insufficient thread engagement of the bolts could result in an insufficient clamping load on the joint. During routine maintenance of brakes there is a potential for the threads in the caliper be damaged or stripped. If unnoticed and the caliper is refitted, there is a possibility of front caliper coming loose which could result in a crash causing personal injury or death.
Safety Risk
No risk description available.
Remedy
Dealers will affect repairs.
4 vehicles affectedMfr ref: 398Updated June 10, 2026
This recall was replaced by Transport Canada Recall No. 2019-573 (FCA Recall No. V62).
On certain vehicles, a fuel pump relay within the Totally Integrated Power Module (TIPM) could fail, causing the engine to stall or to fail to start. Engine stalling would result in a loss of motive power, which, in conjunction with driver reactions and traffic conditions, could increase the risk of a crash resulting in injury and/or damage to property.
Safety Risk
No risk description available.
Remedy
Dealers will install a revised fuel pump relay external to the TIPM.
18,000 vehicles affectedMfr ref: P54Updated June 10, 2026
DURING ASSEMBLY OF THE FRAME, A FILLET WELD THAT JOINS THE INNER STEERING GEAR ATTACHMENT REINFORCEMENT TO THE FRAME RAIL, WAS OMITTED.
Safety Risk
DUE TO HIGH STEERING LOAD EVENTS, VEHICLES CAN EXHIBIT BROKEN STEERING GEAR ATTACHING BOLTS OR FRAME RAIL CRACKING AT THE STEERING GEAR ATTACHING POINT INCREASING THE RISK OF A VEHICLE CRASH.
Remedy
DEALERS WILL INSPECT THE VEHICLES FOR CRACKS IN THE FRAME RAIL. VEHICLES THAT SHOW CRACKS WILL BE EQUIPPED WITH REINFORCEMENT PLATES. VEHICLES THAT ARE FOUND TO BE FREE OF CRACKS WILL HAVE A SLOT CUT IN THE CROSS MEMBER AND THE FILLET WELD WILL BE ADDED.
METAL FUEL LINES WITH AN INCORRECT CONTOUR WERE INSTALLED IN THE ENGINE COMPARTMENT. THE INCORRECT CONTOUR CAN CAUSE THE METAL FUEL LINE TO RUB AGAINST THE INTAKE MANIFOLD.
Safety Risk
PROLONGED RUBBING OF THE FUEL LINE AGAINST THE INTAKEMANIFOLD COULD CAUSE A FUEL LINE LEAK, AND RESULT IN AN ENGINE COMPARTMENT FIREIF THE LEAKING FUEL LINE IS EXPOSED TO A SOURCE OF IGNITION.
Remedy
REPLACE FUEL LINE WITH CORRECTLY CONTOURED FUEL LINE.
On certain vehicles, the engine oil cooler lines could fail, causing an oil leak. Oil may contact a hot engine or exhaust component, which could result in a fire. Oil may also be sprayed onto the tires and/or brakes, which could adversely affect vehicles stability. As well, engine oil spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. These issues could result in property damage and/or personal injury.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury.
Safety Risk
No risk description available.
Remedy
Dealers will replace the passenger frontal airbag module.<br><br>
29,827 vehicles affectedMfr ref: 18015Updated June 10, 2026
VEHICLES EQUIPPED WITH POWER STEERING. THE STEERING INTERMEDIATE SHAFT COUPLING POT JOINT MAY HAVE BEEN MACHINED OVERSIZE IN THE SERRATION AREA WHERE THE JOINT ATTACHES TO THE STEERING GEAR SHAFT. THIS CONDITION MAY HAVE PREVENTED PROPER TIGHTENING OF THE COUPLING AND MAY ALLOW THE COUPLING TO SLIP WHEN THE STEERING WHEEL IS TURNED. THE DRIVER WOULD BE ALERTED BY A RASPING NOISE AND EXCESSIVE WHEEL PLAY. FAILURE TO HEED THE WARNING MAY RESULT IN SUDDEN LOSS OF STEERING CONTROL.
Ford Motor Company (Ford) is recalling certain 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The front brake hoses may rupture prematurely.
Safety Risk
A ruptured front brake hose will cause a brake fluid leak, lengthening the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the front brake hoses with the new hoses that have a revised braid material, free of charge. Owner notification letters were mailed on May 13, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S42.
488,594 vehicles affectedMfr ref: 20S42Updated June 10, 2026
Ford Motor Company (Ford) is recalling certain 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The front brake hoses may rupture prematurely.
Safety Risk
A ruptured front brake hose will cause a brake fluid leak, lengthening the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the front brake hoses with the new hoses that have a revised braid material, free of charge. Owner notification letters were mailed on May 13, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S42.
488,594 vehicles affectedMfr ref: 20S42Updated June 10, 2026
On certain vehicles, The front hub assembly bolts may not have been tightened to specification. If the bolts were to loosen, the brake caliper could separate from the wheel hub assembly, reducing braking performance and affecting vehicle stability. This could result in an accident causing injury and/or damage to property.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and torque bolts to specification.
Tenneco Automotive (Tenneco) is recalling certain Beck/Arnley Master Cylinders, part number 072-9831, sold as aftermarket or replacement parts for 2004-2018 Volkswagen Jetta, and 2012-2019 Volkswagen Beetle vehicles. The fluid seal crimp on the master cylinder may be insufficient, causing brake fluid to leak or the cylinder to come apart.
Safety Risk
If there is a brake fluid leak, it can reduce braking ability, increasing the risk of a crash.
Remedy
Beck/Arnley will notify the distributors that sold the master cylinders and will work with the distributors to notify the end users. Affected master cylinders will be exchanged for a new master cylinder (part number 072-9990), free of charge. The recall began October 30, 2020. Owners may contact Tenneco customer service at 1-800-625-9319.
UNDER A HIGH RESISTANCE LOAD, THE IN-LINE FUSEABLE LINK LOCATED IN THE AREA OF THE PLASTIC WINDSHIELD WASHER BOTTLE BRACKET, MAY MELT DOWN AND IGNITE THE BRACKET. THIS COULD RESULT IN AN ENGINE COMPARTMENT FIRE WITHOUT PRIOR WARNING.
Safety Risk
No risk description available.
Remedy
WINDSHIELD WASHER BOTTLE BRACKET WILL BE REPLACED ON AFFECTED VEHICLES.
39,336 vehicles affectedMfr ref: 7A21/87028Updated June 10, 2026
On certain vehicles, the connecting rods may not have been manufactured properly. As a result, the engine could fail.
Note: This recall only affects certain vehicles equipped with a 3.5L engine.
Safety Risk
An engine failure could cause a sudden loss of power to the wheels and increase the risk of a crash.
Remedy
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the engine.
33 vehicles affectedMfr ref: 25S55Updated June 10, 2026
On certain vehicles, the front brake caliper mounting brackets may have been manufactured incorrectly and could fail, which could result in a loss of vehicle control. This could also increase stopping distances. Both issues could result in a crash causing property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and, if necessary, replace one or both front brake caliper mounting bracket(s).
876 vehicles affectedMfr ref: PC225, PC226Updated June 10, 2026
Certain 4WD vehicles were built with a range shift collar in the transmission transfer case that contains cracks. This condition could result in a complete fracture of the range shift collar and subsequent loss of vehicle forward and reverse gears, and the inability to maintain "park" position. This increases the risk of a vehicle crash resulting from unintended movement of a parked vehicle.
Safety Risk
No risk description available.
Remedy
Dealers will replace the transfer cases and update the control module calibration.
64 vehicles affectedMfr ref: 01061Updated June 10, 2026
On certain vehicles equipped with automatic transmissions, the shift cable may detach from the shift lever. As a result, the driver may not be able to select a different gear position, or place the transmission in the PARK position. If the driver cannot place the vehicle in the PARK position and exits the vehicle without applying the parking brake, the vehicle could roll away, which could result in a crash causing injury and/or damage to property.
Safety Risk
No risk description available.
Remedy
Dealers will inspect the shift cable connection and repair as necessary.
57,531 vehicles affectedMfr ref: R0092Updated June 10, 2026
On certain vehicles, the software update installed by a Ford dealer during recall 24S79 (Transport Canada recall no. 2024-781) may not be effective. As a result, a second repair is required.
On certain vehicles, a problem inside the high-voltage battery could cause a short circuit. If this happens, there could be a loss of power to the wheels and/or the high-voltage battery could overheat.
Note: This recall only affects certain plug-in hybrid vehicles (PHEV) equipped with a 2.5 L engine.
Safety Risk
A loss of power to the wheels could increase the risk of a crash. A battery that overheats can create a fire risk, even while the vehicle is parked and turned off.
Remedy
To reduce the safety risk, Ford advises not to charge your vehicle until the recall repairs have been completed. Ford will notify owners by mail. The corrective actions for this recall are under development.
8,751 vehicles affectedMfr ref: 25SC4Updated June 10, 2026
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021 S580 4Matic and S500 4Matic vehicles. The electrical connector to the steering column module may not be secured properly, which can disable gear shifts and/or safety features including the electronic stability program, the driver's air bag, and turn signal indicators.
Safety Risk
Disabled safety features or the inability to shift gears can increase the risk of a crash or injury.
Remedy
Dealers will inspect and reinstall the cover for the electrical connector, as necessary, free of charge. Owner notification letters were mailed May 13, 2022. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2022040006.
4 vehicles affectedMfr ref: 2022040006Updated June 10, 2026
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021 S580 4Matic and S500 4Matic vehicles. The electrical connector to the steering column module may not be secured properly, which can disable gear shifts and/or safety features including the electronic stability program, the driver's air bag, and turn signal indicators.
Safety Risk
Disabled safety features or the inability to shift gears can increase the risk of a crash or injury.
Remedy
Dealers will inspect and reinstall the cover for the electrical connector, as necessary, free of charge. Owner notification letters were mailed May 13, 2022. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2022040006.
4 vehicles affectedMfr ref: 2022040006Updated June 10, 2026
