GM IS RECALLING 207,542 MY 1997-2003 BUICK REGAL AND PONTIAC GRAND PRIX VEHICLES EQUIPPED WITH A 3.8L SUPERCHARGED V-6 ENGINE. THESE VEHICLES HAVE HIGHER FRONT ROCKER COVER GASKET TEMPERATURES, CREATING THE POTENTIAL FOR EARLIER DEGRADATION OF THE FRONT ROCKER COVER GASKET AND EVENTUAL OIL SEEPAGE.
Safety Risk
CERTAIN UNDERHOOD FIRES MAY BE CAUSED BY DROPS OF ENGINE OIL, FROM SEEPAGE OR SPILLAGE, BEING DEPOSITED ON THE EXHAUST MANIFOLD THROUGH HARD BRAKING. IF THE MANIFOLD IS HOT ENOUGH AND THE OIL RUNS BELOW THE HEAT SHIELD, IT MAY IGNITE INTO A SMALL FLAME AND, IN SOME INSTANCES, THE FIRE MAY SPREAD TO THE PLASTIC SPARK PLUG WIRE CHANNEL AND BEYOND.
Remedy
DEALERS WILL REPLACE THE ENGINES FRONT VALVE COVER AND FRONT-VALVE-COVER GASKET WITH NEW PARTS OF AN IMPROVED DESIGN AND REMOVE THE ENGINES PLASTIC COVER AND PLASTIC OIL-FILL-TUBE EXTENSION, ALONG WITH THE 1-3-5 SPARK PLUG WIRE RETAINERS, FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2016. , FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2016. UNTIL THE REMEDY IS COMPLETED, GM STRONGLY RECOMMENDS THAT OWNERS OBSERVE THE FOLLOWING IMPORTANT PRECAUTIONS (1) THAT OWNERS DO NOT PARK THEIR VEHICLE IN A GARAGE, CAR PORT, OR OTHER STRUCTURE; (2) IF OWNERS NOTICE A BURNING ODOR, THEY SHOULD HAVE THEIR DEALER INSPECT THE VEHICLE. THE DEALER WILL INSPECT THE VEHICLE WITHOUT CHARGE; (3) USE PREMIUM FUEL (91 OCTANE OR HIGHER) IN THE VEHICLE AS RECOMMENDED IN THE VEHICLE'S OWNER MANUAL. OWNERS MAY CONTACT BUICK AT 1-866-608-8080 OR PONTIAC AT 1-800-620-7668, OR THROUGH THEIR WEBSITE AT <A HREF=HTTP://WWW.GMOWNERCENTER.COM>HTTP://WWW.GMOWNERCENTER.COM</A> .
General Motors (GM) is recalling certain model year 2007 Chevrolet Equinox and Pontiac Torrent vehicles originally sold or currently registered in Arizona, California, Nevada, and Texas; model year 2007 Chevrolet Cobalt, Pontiac G5, and Saturn ION vehicles originally sold, or currently registered in, Arizona, California, Florida, Nevada, or Texas; model year 2008 Chevrolet Cobalt and Pontiac G5 vehicles originally sold, or currently registered in, Arizona; and model year 2009 Chevrolet Cobalt and Pontiac G5 vehicles originally sold, or currently registered in, Arkansas, Arizona, California, Nevada, Oklahoma, or Texas. Some of these vehicles have a condition in which the plastic supply or return port on the fuel pump module may crack, which could cause a fuel leak.
Safety Risk
Fuel leakage in the presence of an ignition source may result in a fire.
Remedy
GM will notify owners, and dealers will replace the fuel pump module, free of charge. Notification to owners began on on November 21, 2012. Owners were instructed to not bring their vehicles in for repair until January 2013. Owners may contact General Motors at 1-800-521-7300.
On certain vehicles the accelerator pedal movement may become rough, slow to return, or stick in a depressed position. This problem is caused by either wear or high humidity and could result in a loss of control leading to a vehicle crash causing property damage, personal injury or death.
Safety Risk
No risk description available.
Remedy
Dealers will install a steel reinforcement bar to the accelerator pedal assembly. With this reinforcement in place, the excess friction that can cause the pedal to stick is eliminated.
28,488 vehicles affectedMfr ref: 10018Updated June 10, 2026
THE HOOD LATCH ASSEMBLY MAY NOT HAVE BEEN PROPERLY INSTALLED AND THE SECONDARY HOOD LATCH MAY BE PREVENTED FROM ENGAGING WHEN THE HOOD IS CLOSED.
Safety Risk
IF THE PRIMARY HOOD LATCH ENGAGEMENT FAILS, THE LACK OFENGAGEMENT BY THE SECONDARY HOOD LATCH COULD CAUSE THE HOOD TO OPEN WHILE THEVEHICLE IS IN MOTION, REDUCING OPERATOR'S ABILITY TO SEE THE ROAD AND ONCOMINGTRAFFIC, AND POSSIBLY RESULTING IN A VEHICLE ACCIDENT.
Remedy
ADJUST THE SECONDARY HOOD LATCH TO ALLOW THE LATCH ASSEMBLY TO PROPERLY ENGAGE WHEN THE HOOD IS CLOSED.
On certain 2500 and 3500 series vehicles, a wheel bearing assembly retaining nut was omitted during assembly, which could lead to a possible bearing separation. If this were to occur, the ABS warning lamp would illuminate and the ABS system would be disabled. The driver would also notice a grinding noise, a decrease in vehicle speed and a steering pull in the direction of the affected assembly. Failure to heed these warnings can result in loss of vehicle control and a crash.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and replace the wheel bearing assembly if a missing nut is noted during inspection.
1,182 vehicles affectedMfr ref: 02053Updated June 10, 2026
On certain vehicles, a malfunction of the vehicle speed sensor can result in an intermittent high idle condition with speeds higher than expected by the operator. This could result in loss of vehicle control.
Safety Risk
No risk description available.
Remedy
The engine controller software will be changed to correct for erroneous speed sensor signals.
5,314 vehicles affectedMfr ref: 799Updated June 10, 2026
VEHICLES PRODUCED AT THE KANSAS CITY ASSEMBLY PLANT.
VEHICLES MAY HAVE BEEN PRODUCED WITH A MISSING OR IMPROPERLY TORQUED PINCH BOLT AND NUT USED TO ATTACH THE INTERMEDIATE STEERING SHAFT TO THE STEERING COLUMN. IF THE PINCH BOLT IS MISSING OR HAS DISENGAGED, THE INTERMEDIATE STEERING SHAFT COULD SLIP RELATIVE TO THE STEERING COLUMN AND EVENTUALLY SEPARATE FROM THE COLUMN RESULTING IN A LOSS OF STEERING CONTROL.
Safety Risk
No risk description available.
Remedy
No remedy description available.
2,135 vehicles affectedMfr ref: 385Updated June 10, 2026
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES (4 WHEEL-DRIVE). SOME OF THESE VEHICLES WERE BUILT WITH A RANGE SHIFT COLLAR IN THE TRANSMISSION TRANSFER CASE THAT CONTAINS CRACKS.
Safety Risk
THIS CONDITION COULD RESULT IN A COMPLETE FRACTURE OF THE RANGE SHIFT COLLAR AND SUBSEQUENT LOSS OF VEHICLE FORWARD AND REVERSE GEARS, AND THE INABILITY TO MAINTAIN "PARK" POSITION. THIS INCREASES THE RISK OF A VEHICLE CRASH RESULTING FROM UNINTENDED MOVEMENT OF A PARKED VEHICLE.
Remedy
DEALERS WILL REPLACE THE TRANSFER CASES AND UPDATE THE CONTROL MODULE CALIBRATION. OWNER NOTIFICATION BEGAN SEPTEMBER 6, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.
BMW of North America, LLC (BMW) is recalling certain 2022-2024 iX xDrive50 and iX M60 vehicles. The driver may unintentionally reactivate the cruise control system while turning the steering wheel at low speeds, resulting in a sudden increase of vehicle speed.
Safety Risk
A sudden increase in vehicle speed can increase the risk of a crash.
Remedy
Dealers will update the vehicle software, free of charge. Owner notification letters were mailed August 2, 2023. Owners may contact BMW customer service at 1-800-525-7417.
On certain vehicles, the tunnel heat shield may drop down and rub on the drive shaft, which could eventually result in the drive shaft breaking and loss of motive power. In conjunction with traffic and road conditions and driver reactions, this could increase the risk of a crash. A broken drive shaft could also impact the tunnel with sufficient force to cause airbag deployment. Unintended airbag deployment, in a non-warranted (non-impact) situation could startle the driver which could result in a vehicle crash causing property damage and/or personal injury. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants.
Safety Risk
No risk description available.
Remedy
Dealers will install a heat shield support bracket.
1,036 vehicles affectedMfr ref: N10Updated June 10, 2026
The engine wire harness may contact a heat shield in the engine compartment. Over time, this could cause wear and result in damage to electrical wires. If this happens, it could cause problems with engine performance, including: entering idle limp mode, causing torque limitation, engine misfire, engine stall and/or a build-up of unburnt fuel in the catalyst.
Safety Risk
A sudden loss of engine power could increase the risk of a crash. A build-up of unburnt fuel in the catalyst could cause it to overheat, increasing the risk of fire.
Remedy
McLaren will notify dealers and advise them to contact each vehicle owner by telephone to advise them of this problem. The dealer will arrange for a service appointment so that the engine wire harness can be inspected and repaired as required.
THESE VEHICLES MAY HAVE AN E-CELL TIMER UNIT INTERFERING WITH THE ACCELERATOR PEDAL ASSEMBLY AND POSSIBLY PREVENTING THE ENGINE FROM RETURNING TO IDLE WHEN THE DRIVER HAS REMOVED HIS FOOT FROM THE ACCELERATOR PEDAL. LOSS OF ACCELERATOR CONTROL COULD RESULT IN VEHICLE CRASH WITHOUT PRIOR WARNING.
Safety Risk
No risk description available.
Remedy
No remedy description available.
115 vehicles affectedMfr ref: E-CELL 70Updated June 10, 2026
Triumph Motorcycles America, Ltd. (Triumph) is recalling certain 2024-2025 Daytona 660 motorcycles. The engine may fail due to internal damage from a disruption of oil flow.
Safety Risk
Engine failure increases the risk of a crash.
Remedy
Dealers will increase the engine oil capacity and install a redesigned dipstick, free of charge. Owner notification letters were mailed September 10, 2025. Owners may contact Triumph customer service at 1-678-854-2010. Triumph's number for this recall is SRAN 640.
1,929 vehicles affectedMfr ref: SRAN 640Updated June 10, 2026
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Safety Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Safety Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Safety Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Safety Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Safety Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Safety Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Safety Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
