On certain vehicles, the front passenger's seat frame may not have been properly welded. As a result, the seat could fail and move in a crash.
Safety Risk
A seat that fails in a crash could create an increased risk of injury.
Remedy
General Motors will notify owners by mail and instruct you to take your vehicle to a dealership to inspect and, if necessary, replace the front passenger's seat cushion frame.
125 vehicles affectedMfr ref: N222368320Updated June 10, 2026
On certain vehicles, the connector on the high pressure fuel line in the engine compartment could crack and create a fuel leak.
Note: This recall only affects vehicles equipped with a 2.0 L engine.
Safety Risk
A fuel leak can create the risk of a fire.
Remedy
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the fuel supply line. It will be replaced, if required.
1,377 vehicles affectedMfr ref: Y10Updated June 10, 2026
On certain vehicles, the right rear seat belt buckle may have been manufactured incorrectly and may not properly restrain an occupant in the event of a crash, increasing the risk of injury.
Safety Risk
No risk description available.
Remedy
Dealers will replace the rear right seat belt buckle with an improved part.
66 vehicles affectedMfr ref: AJ09Updated June 10, 2026
Certain vehicles do not comply with the requirements of CMVSS 208 - Occupant Restraint Systems in Frontal Impact. In a flat frontal barrier impact, these vehicles may not satisfy the chest deflection criteria of the standard.
Safety Risk
No risk description available.
Remedy
The driver seat belt retractor assembly will be replaced with the new constant force retractor.
95 vehicles affectedMfr ref: 962Updated June 10, 2026
On certain vehicles, the ABS Modulator valve cover retaining bolts can crack due to stresses transmitted by the flexing valve covers. This is a result of significant operation of traction or hill descent control, primarily associated with extensive off-road use. This defect can produce an unexpected increase in stopping distance, with the potential for total loss of service braking function, which would increase the likelihood of a crash.
Safety Risk
No risk description available.
Remedy
Dealer will strengthen the ABS Modulator assembly valve covers and replace the retaining bolts.
3,527 vehicles affectedMfr ref: B148Updated June 10, 2026
On certain vehicles, the fuel tank inlet check valve may not fully close after refueling. This could allow some fuel to escape from the fuel tank filler tube. Fuel, in the presence of an ignition source, can result in a fire.
Safety Risk
No risk description available.
Remedy
Dealers will inspect the check valve and, if required, replace the fuel tank assembly.
445 vehicles affectedMfr ref: H45Updated June 10, 2026
On certain vehicles, the wiring harness for the steering column switch module may have been incorrectly routed during manufacturing. This could cause the harness to chafe on the steering column adjustment, which could affect or cause one or more of the following systems to fail: turn signals, gear selector, Electric Power Steering (EPS) or Electronic stability control functions. Additionally, this condition could potentially cause the engine to stall, and could affect proper airbag deployment or cause an airbag to deploy inadvertently. These potential outcomes in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing injury and/or property damage.
Safety Risk
No risk description available.
Remedy
Dealers will inspect, repair and reroute the wiring harness as necessary.
On certain vehicles, the insulated bulkhead connector (used to join the two halves of the positive battery cable) may have been incorrectly installed during vehicle assembly. Over time, the bolt connection could loosen, which would increase electrical resistance. In addition, an incorrectly insulated bulkhead connector could allow humidity to accumulate at this location, causing current leakage. These issues could cause the cable connection to overheat, which could result in a vehicle fire causing property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and, as necessary, secure the insulated bulkhead connector. In addition, protective grease will be added to the area and the plastic battery positive terminal cover will be replaced.
On certain vehicles, there may be a problem with the driver and front passenger seat belt pretensioners. As a result, the seat belt pretensioners could explode in a crash. If this happens, small pieces of metal could hit people in the vehicle.
Note: This recall only affects Santa Fe Hybrid (HEV) and Santa Fe Plug-In Hybrid (PHEV) models.
Safety Risk
A seat belt pretensioner that explodes could create a risk of injury.
Remedy
Hyundai will notify owners by mail and instruct you to bring your vehicle to a dealership to install protective caps over the driver and front passenger's seat belt pretensioners.
4,787 vehicles affectedMfr ref: R0226 (21D156)Updated June 10, 2026
Certain vehicles do not comply with the requirements of CMVSS 120 - Tire Selection and Rims for Vehicles Other Than Passenger Cars. Wheels were supplied without the required rim markings.
Safety Risk
No risk description available.
Remedy
Since there is no risk to vehicle safety, Mazda will not be taking any further action in this regard.
THERE IS A POSSIBILITY OF A DISPLACEMENT OF THE EXHAUST GAS RECIRCULATION (E.G.R.) MANIFOLD CORE PLUGS THAT COULD RESULT IN ENGINE STALLING AND LOSS OF POWER.
Certain vehicles do not comply with the requirements of CMVSS 101 - Location and Identification of Controls and Displays. Vehicles exhibit a condition in which the "Oil Warning Light" will not illuminate under low/no oil pressure conditions.
Safety Risk
No risk description available.
Remedy
Dealers will reflash the vehicle PCM with new calibration software.
9,274 vehicles affectedMfr ref: 01025Updated June 10, 2026
On certain motorcycles, the fuel tank breather hose may have been installed incorrectly, causing it to be pinched between the frame and other neighboring components. In high ambient temperatures, the pressure inside the fuel tank could build-up, resulting in the bulging of the tank near the rear tire. Severe suspension compression, with a high payload, can cause the bottom of the tank to rub against the rear wheel, potentially resulting in a fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire. Also, the rear wheel could lose traction as a result of fuel spillage, which could cause a vehicle crash with personal injuries or death.
On certain vehicles, a solder joint on the engine oil pressure sending unit could fail and leak engine oil. This could create the potential for an engine compartment fire.
Safety Risk
No risk description available.
Remedy
No remedy description available.
228 vehicles affectedMfr ref: 226TUpdated June 10, 2026
VEHICLES WERE BUILT WITH AN INCORRECT OUTER BEARING CUP INSTALLED IN THE RIGHT FRONT WHEEL HUB. THIS WOULD RESULT IN A LACK OF LUBRICATION IN THE BEARING AND COULD CAUSE THE BEARING TO FAIL. CONTINUED VEHICLE OPERATION WOULD DAMAGE THE WHEEL SPINDLE AND MAY CAUSE A LOSS OF VEHICLE CONTROL AND VEHICLE CRASH. ALL VEHICLES WERE SOLD IN THE PROVINCE OF ONTARIO.
Safety Risk
No risk description available.
Remedy
No remedy description available.
4 vehicles affectedMfr ref: 265Updated June 10, 2026
On certain vehicles, the transmission was replaced before being shipped from the assembly plant. This involved removing and reinstalling the propeller shafts. When the propeller shafts were reinstalled, the tightening torque of some of the attaching bolts may not have been to specification. Therefore, there is a possibility that those bolts may become loose.
Safety Risk
No risk description available.
Remedy
Dealer will replace all drive shaft bolts.
8 vehicles affectedMfr ref: R83Updated June 10, 2026
On certain vehicles, the second stage of the front passenger dual-stage airbag may not deploy as commanded during a severe frontal impact. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant.
Safety Risk
No risk description available.
Remedy
Dealers will replace the front passenger airbag.
37 vehicles affectedMfr ref: 11302Updated June 10, 2026
THE FRONT OUTBOARD SEAT BELTS MANUFACTURED BY FUJI KIKO CO. LTD. MAY BECOME STUCK IN THE RETRACTOR DUE TO THE DISENGAGEMENT OF THE PLASTIC DAMPER OF THE EMERGENCY LOCKING RETRACTOR MECHANISM. THIS WOULD RESULT IN FRONT SEAT PASSENGERS BEING UNABLE TO FASTEN THEIR SEAT BELTS.
Safety Risk
No risk description available.
Remedy
No remedy description available.
7,927 vehicles affectedMfr ref: R14Updated June 10, 2026
