4,163 of 26,053 recalls from Transport Canada and NHTSA.
THE STOP LAMP SWITCHES COULD INTERMITTENTLY MALFUNCTION RESULTING IN THE STOP LAMPS NOT ILLUMINATING WHEN THE BRAKES ARE APPLIED.
THIS COULD RESULT IN FOLLOWING MOTORISTS NOT BEINGSIGNALED THAT THE VEHICLE IS BRAKING, AND COULD RESULT IN A COLLISION.
REPLACE THE FAULTY STOP LAMP SWITCHES.
Bugatti is recalling certain 2006-2010 Veyron vehicles manufactured March 10, 2006, to March 9, 2012, 2010-2012 Veyron Grand Sport vehicles manufactured September 29, 2009, to October 14, 2014, and 2011-2013 Veyron Super Sport vehicles manufactured February 18, 2011, to August 17, 2012. In the affected vehicles, the underbody aluminum reference plates used when lifting the vehicle may corrode and detach from the vehicle.
If these jacking plates separate from the vehicle while driving, they may be a road hazard, potentially striking another vehicle, and increasing the risk of a crash.
Bugatti will notify owners, and dealers will rivet and seal the underbody aluminum reference plates, free of charge. The recall began on May 26, 2016. Owners may contact Bugatti at (805) 557-1050.
Bugatti is recalling certain 2006-2010 Veyron vehicles manufactured March 10, 2006, to March 9, 2012, 2010-2012 Veyron Grand Sport vehicles manufactured September 29, 2009, to October 14, 2014, and 2011-2013 Veyron Super Sport vehicles manufactured February 18, 2011, to August 17, 2012. In the affected vehicles, the underbody aluminum reference plates used when lifting the vehicle may corrode and detach from the vehicle.
If these jacking plates separate from the vehicle while driving, they may be a road hazard, potentially striking another vehicle, and increasing the risk of a crash.
Bugatti will notify owners, and dealers will rivet and seal the underbody aluminum reference plates, free of charge. The recall began on May 26, 2016. Owners may contact Bugatti at (805) 557-1050.
Bugatti is recalling certain 2006-2010 Veyron vehicles manufactured March 10, 2006, to March 9, 2012, 2010-2012 Veyron Grand Sport vehicles manufactured September 29, 2009, to October 14, 2014, and 2011-2013 Veyron Super Sport vehicles manufactured February 18, 2011, to August 17, 2012. In the affected vehicles, the underbody aluminum reference plates used when lifting the vehicle may corrode and detach from the vehicle.
If these jacking plates separate from the vehicle while driving, they may be a road hazard, potentially striking another vehicle, and increasing the risk of a crash.
Bugatti will notify owners, and dealers will rivet and seal the underbody aluminum reference plates, free of charge. The recall began on May 26, 2016. Owners may contact Bugatti at (805) 557-1050.
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. The brake light switch may have been improperly adjusted and could result in the brake lamps failing to illuminate during a service brake application, contrary to the requirements of the standard. This could increase the risk of a crash causing injury and/or damage to property.
No risk description available.
Dealers will adjust the brake lamp switch.
Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2022 NQR Gas and NRR Gas trucks equipped with 6.0L engines. The engine wiring harness assembly was incorrectly wired to the oil pressure sensor.
An incorrectly wired oil pressure sensor will not alert the driver to low oil pressure, possibly resulting in an engine stall and increasing the risk of a crash.
Dealers will fix the engine wiring harness assembly connector in the engine oil pressure sensor, free of charge.. Owner notification letters were mailed on July 29, 2022. Owners may contact Isuzu's customer service at 1-866-441-9638. Isuzu's number for this recall is V2202.
Watts Manufacturing, LLC (Watts Manufacturing) is recalling certain 2019 First responder vehicles built on Ford F-550 chassis and equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Watts Manufacturing will notify owners and Whelen dealers will replace the brake lights, free of charge. The recall began March 19, 2019. Owners may contact Watts Manufacturing customer service at 1-785-404-6003.
Certain vehicles do not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 111 - Mirrors and Rear Visibility Systems. Due to a software programming error, the rearview image may not display on the centre display screen while the vehicle is in the reverse gear. This could increase the risk of a crash causing property damage or injury.
No risk description available.
Dealers will reprogram the centre display assembly software.
BMW of North America, LLC (BMW) is recalling certain 2013-2015 BMW 760Li vehicles. The Engine Control Unit (ECU) may have been programmed with incompatible software during a service visit, possibly causing the engine to stall.
An engine stall can increase the risk of a crash.
All affected vehicles have been repaired by programming the ECU with the correct software. Therefore, owner letters will not be sent. Owners may contact BMW customer service at 1-800-525-7417.
BMW is recalling certain model year 2012-2013 S 1000 RR motorcycles manufactured September 2011, through December 2012. Due to a manufacturing fault, the side-stand attachment bolts could start to loosen. The loosening of the side-stand bolts could cause the stand to separate from the frame of the motorcycle.
A separation of the side-stand could cause the motorcycle to fall, causing a risk of injury.
BMW will notify owners, and dealers will clean the sidestand mounting plate threads and replace the side-stand mounting plate bolts, free of charge. The recall began on January 29, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2022 Toyota 4Runner vehicles. The driver's side high beam may be inoperable after the installation of accessory fog lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
An inoperable driver's side high beam may reduce visibility, increasing the risk of a crash.
Dealers will install an updated wiring harness, free of charge. Owner notification letters were mailed February 11, 2022. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET21A.
On certain vehicles equipped with diesel engines, a temporary fuel tank breather tube cap may not have removed during assembly, and the tube may not have been correctly affixed to the bed rail. As a result, the fuel tank may not receive proper ventilation through the fuel tank breather tube and, in some instances, may deform. This condition could result in the fuel gauge, and the separate “distance to empty” meter, to both display inaccurately. If this occurs, the vehicle could possibly run out of fuel, which would cause the engine to stall without warning to the driver. Engine stalling could increase the risk of a crash causing injury and/or property damage.
No risk description available.
Dealers will inspect the fuel tank breather tube for proper routing and inspect for the absence of the temporary fuel tank breather tube cap to determine if a vehicle is affected. The temporary fuel tank breather tube cap will be removed and fuel tank, fuel sending unit, and/or fuel tank breather tube will be replaced as necessary.
Certain vehicles have an insufficient amount of lubrication between the windshield wiper motor drive arm pivot and the wiper linkage dust cover that may bind and cause the wiper linkage to separate from the windshield wiper motor. If this occurs the windshield wiper motor will still operate but the windshield wipers will not function. This condition can result in reduced driver visibility during inclement weather and a possible crash.
No risk description available.
Dealers will replace the rubber boot (dust cover) which covers the ball joint connection and lubricate the new boot where it contacts the wiper arm.
On certain Volvo 760 GLE, due to brake warning valve end-plugs which do not meet specifications, there is a possibility that a slow leakage of brake fluid may occur in the electrical connection to the brake warning valve. Leakage of brake fluid through the electrical contact would result in a brake failure signal not being relayed to the driver.
No risk description available.
No remedy description available.
Ford Motor Company (Ford) is recalling certain 2017-2019 Flex vehicles. The driver and front passenger B-Pillar door trim may detach while driving.
Door trim that detaches while driving can create a road hazard, increasing the risk of a crash.
Dealers will repair or replace the B-pillar trim as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed December 17, 2025. Additional letters will be sent once the final remedy is available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SB8. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 28, 2025.
On certain vehicles, the windshield wipers may become inoperative if the vehicle battery loses charge, causing unstable vehicle voltage, or if the vehicle is jump started while the wipers are on and restricted with ice and/or snow. Loss of windshield wiping capability, should it occur during a rainy/snowy day, may compromise the driver’s ability to see the road and its users, which could result in a crash causing property damage and/or personal injury.
No risk description available.
Dealers will replace the front wiper module.
Chrysler (FCA US, LLC) is recalling certain 2024-2025 Fiat 500e Battery Electric (BEV) vehicles. The headlight horizontal aim adjustment is not covered as intended, which can result in improperly adjusted headlights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Improperly adjusted headlights can reduce driver visibility or create a glare for oncoming traffic, increasing the risk of a crash.
Dealers will install headlight adjustment plugs. Owner notification letters were mailed December 10, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is A4C. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning October 28, 2025.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 22S65 (Transport Canada recall no. 2022-596) may not have been done correctly. As a result, a second repair is required. On certain vehicles, a software problem could cause the controls for the ventilation control system (HVAC) not to work. As a result, you may not be able to defog or defrost the windshield or windows. Note: This recall only affects vehicles equipped with a 12" display screen, SYNC 4 and electronic automatic temperature controls.
A windshield that cannot be defogged or defrosted can reduce visibility and increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the remote climate control module software.
On certain vehicles, the Bosch fuel pump may cavitate causing poor engine performance and possible engine stalling.
No risk description available.
Dealer will inspect and replace the Bosch fuel pumps with a new pump designed by Walbro.
Ford Motor Company (Ford) is recalling certain model year 2013-2014 Escape vehicles manufactured October 5, 2011, to April 1, 2013, and equipped with 2.0 liter engines and Focus ST vehicles manufactured February 14, 2012, to October 14, 2013, and equipped with 2.0 liter engines. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM).
The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.
Ford will notify owners, and dealers will replace the current crimped splices with new splices, free of charge. The recall began in October 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S17.
We may earn a commission for purchases made through these links.
