BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive40i, xDrive40i, X5 M50i, X5M, X7 xDrive40i, X7 M50i, X6 xDrive40i, X6 M50i and X6M vehicles and 2021 X5 xDrive45e vehicles. The weld between the front axle support and the right front control arm bearing bracket may separate.
Safety Risk
If the weld between the front axle support and the right front control arm bearing bracket separates, vehicle handling and control may be affected, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the front axle support, free of charge. The recall began December 18, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive40i, xDrive40i, X5 M50i, X5M, X7 xDrive40i, X7 M50i, X6 xDrive40i, X6 M50i and X6M vehicles and 2021 X5 xDrive45e vehicles. The weld between the front axle support and the right front control arm bearing bracket may separate.
Safety Risk
If the weld between the front axle support and the right front control arm bearing bracket separates, vehicle handling and control may be affected, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the front axle support, free of charge. The recall began December 18, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive40i, xDrive40i, X5 M50i, X5M, X7 xDrive40i, X7 M50i, X6 xDrive40i, X6 M50i and X6M vehicles and 2021 X5 xDrive45e vehicles. The weld between the front axle support and the right front control arm bearing bracket may separate.
Safety Risk
If the weld between the front axle support and the right front control arm bearing bracket separates, vehicle handling and control may be affected, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the front axle support, free of charge. The recall began December 18, 2020. Owners may contact BMW customer service at 1-800-525-7417.
THESE VEHICLES MAY HAVE AN IMPROPERLY ASSEMBLED REAR AXLE. THIS CONDITION COULD RESULT IN REAR WHEEL BEARING FAILURE, CAUSING THE REAR WHEEL AND AXLE TO SEPARATE FROM THE VEHICLE. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND POSSIBLE CRASH.
Safety Risk
No risk description available.
Remedy
No remedy description available.
669 vehicles affectedMfr ref: LRAXLE 70Updated June 10, 2026
On certain vehicles, the engine starter may not have been manufactured properly. As a result, the starter could overheat.
Safety Risk
A starter that overheats can create the risk of a fire.
Remedy
To reduce the safety risk, BMW recommends not using the remote start function and not leaving the vehicle unattended with the engine running until the recall repairs have been completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the engine starter.
6,958 vehicles affectedMfr ref: 12 80 26RCUpdated June 10, 2026
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of injury to the seat occupant.
Safety Risk
No risk description available.
Remedy
Dealers will replace the driver frontal airbag inflator.
6,494 vehicles affectedMfr ref: 1917LUpdated June 10, 2026
On certain vehicles equipped with an oil pan heater, over time, dust, dirt and moisture may collect at the contact point between the oil pan heater cord and the extension cord. As a result, the extension cord could overheat, which may melt the oil pan heater plug and/or block heater plug (if equipped). This could result in a fire causing property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and clean the oil pan heater plug and the engine block heater plug (if equipped). Heat damaged plugs will be replaced. In addition, dealers will replace the extension cord and advise owners to store the cord indoors when not in use.
743 vehicles affectedMfr ref: DET-13-106Updated June 10, 2026
Certain vehicles may have received an incorrectly manufactured rear driveshaft coupling (part number TVF100010) as a replacement part during service. Drive coupling failure could allow the driveshaft to detach from the vehicle, resulting in a loss of propulsion which, in conjunction with traffic and road condition, and the driver's reactions, could increase the risk of a crash. As well, a driveshaft separating from the vehicle could strike another vehicle, stationary object, or bystander. These issues could result in property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will replace the driveshaft coupling.
5 vehicles affectedMfr ref: P024Updated June 10, 2026
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Remedy
Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
11 vehicles affectedMfr ref: 72 81 20RCUpdated June 10, 2026
On certain vehicles, if the water drainage system of the panoramic sunroof becomes damaged or impaired (such as during a repair), water could enter the side head curtain airbag canister. Due to a foam that is touching the airbag inflator, moisture could cause corrosion on the airbag inflator over time. If this happens, the airbag canister could be weakened. This could cause the airbag canister to fracture without airbag deployment and allow fragments to be propelled toward vehicle occupants, increasing the risk of injury.
Safety Risk
No risk description available.
Remedy
Dealers will inspect the vehicle for evidence of water ingress, examine the drainage system, disassemble the headliner and trim, remove foam and inspect the side head curtain airbag canister for relevant corrosion. In cases where light surface corrosion is found, a wax will be applied to the inflator. In cases of more than light surface corrosion, the inflator will be replaced after a robustness check.
36,349 vehicles affectedMfr ref: 69P1Updated June 10, 2026
On certain vehicles, front control arms may not meet specifications and could break, affecting vehicle control. This could increase the risk of injury and/or damage to property.
DEFECT: THE DRIVE TRAIN HAS A SIDE PLATE WHICH WAS IMPROPERLY HEAT TREATED. EXPOSURE TO CORROSIVE ENVIRONMENTAL CONDITIONS COULD CAUSE THE CHAIN SIDE PLATE TO CRACK AND ULTIMATELY FAIL. THIS COULD RESULT IN A LOSS OF DRIVING FORCE TO THE REAR WHEEL, AND THE CHAIN COULD BECOME ENTANGLED IN VARIOUS COMPONENTS OF THE MOTORCYCLE CAUSING A POSSIBLE ACCIDENT.
On certain vehicles, the rubber boot on the lower lateral ball joint could be damaged, allowing the intrusion of dirt and water, leading to extraordinary wear on the ball joint and possible separation. This could result in loss of vehicle control and a possible crash without prior warning.
Safety Risk
No risk description available.
Remedy
Lower lateral ball joints will be inspected and if cut or damaged boots are found, the lower lateral arm will be replaced.
10,789 vehicles affectedMfr ref: 827Updated June 10, 2026
On certain vehicles, water may enter the driver's power window master switch. Although Honda previously attempted to remedy this problem by installing a plastic cover over the switch, this fix was inadequate. Water intrusion could cause the switch to overheat, which may result in a fire causing property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and, if necessary, replace the driver’s power window master switch.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2015-2018 Yamaha YZFR3 motorcycles. The upper radiator hose may crack resulting in a coolant leak.
Safety Risk
If coolant leaks onto the rear tire, it can cause a loss of control, increasing the risk of a crash.
Remedy
Yamaha will notify owners, and dealers will install a new upper radiator hose, free of charge. The recall began December 17, 2018. Owners may contact Yamaha customer service at 1-800-962-7926. Yamaha's number for this recall is 990125.
16,760 vehicles affectedMfr ref: 990125Updated June 10, 2026
Harley-Davidson Motor Company (Harley) is recalling certain 2021-2026 RH1250S (Sportster S) motorcycles. The upper triple clamp may fracture.
Safety Risk
An upper triple clamp that fractures can lead to a loss of control, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the upper triple clamp, as necessary, free of charge. Owner notification letters are expected to be mailed February 19, 2026. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson's number for this recall is 0191. This recall expands previous NHTSA recall number 25V590. Motorcycles that were repaired under the previous recall will need to have the new remedy performed.
9,401 vehicles affectedMfr ref: 0191Updated June 10, 2026
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2019-2024 Jaguar I-PACE vehicles. The high-voltage battery may overheat.
Safety Risk
The high-voltage battery overheating increases the risk of a fire.
Remedy
Owners are advised to park and charge vehicle outside and away from structures until the recall repair is complete. The battery energy control module software will be updated by a dealer, or through an over-the-air (OTA) update. In addition, battery modules will be replaced as necessary. Repairs will be performed free of charge. Owner notification letters were mailed July 18, 2023. Owners may contact Jaguar's customer service at 1-800-452-4827. Jaguar's number for this recall is H441.
6,422 vehicles affectedMfr ref: H441Updated June 10, 2026
Hyundai Motor America (Hyundai) is recalling certain 2013-2014 Sonata and Santa Fe Sport vehicles. Machining errors during the engine manufacturing process may cause premature bearing wear within the engine.
Safety Risk
Bearing wear may result in the engine seizing, increasing the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will inspect the engine, replacing the engine short block, as necessary, free of charge. The recall began June 2017. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 162.
572,000 vehicles affectedMfr ref: 162Updated June 10, 2026
