Bearing Technologies Ltd (Bearing) is recalling certain Duralast Wheel Spindles, part number DL930676K, sold as a service part for the front wheel hub spindle of 2007-2010 Ford Edge vehicles. The affected wheel spindles have wheel mounting studs with an oversized shoulder that can prevent the wheel from being installed correctly.
Safety Risk
If the wheel is installed incorrectly, the wheel may vibrate or wobble, increasing the risk of a crash.
Remedy
Bearing will notify the distributors of the spindles. If the studs on a defective spindle are not loose, Bearing will replace the studs at no charge. If the studs on a defective spindle are loose, Bearing will replace the spindle assembly at no charge. Bearing will also pay shop labor for the remedy. The recall began on October 16, 2017. Owners may contact Bearing Technologies customer service at 1-800-597-3486 or visit www.recall17E053.com.
Volvo Trucks North America (Volvo) is recalling certain 2017 Volvo VHD, VNL, and VNM trucks manufactured February 19, 2016, to June 21, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.
Safety Risk
Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.
Remedy
Volvo will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1607.
Nissan is recalling certain model year 2012 Frontier, Pathfinder, and Xterra two-wheel drive vehicles manufactured from June 19, 2012, through July 12, 2012. These vehicles may have been equipped with front wheel hubs that may not meet the design hardness specifications. A wheel hub that was manufactured below hardness specification may wear prematurely and eventually crack.
Safety Risk
If the vehicle is driven in this condition, the wheel hub may break, possibly resulting in a vehicle crash.
Remedy
Nissan will notify owners, and dealers will replaced the left and right side front wheel hub assemblies free of charge. The safety recall began on October 22, 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
Suzuki is recalling certain model year 2012 Equator two-wheel drive vehicles manufactured from June 19, 2012, through July 12, 2012. These vehicles may have been equipped with front wheel hubs that may not meet the design hardness specifications. A wheel hub that was manufactured below hardness specification may wear prematurely and eventually crack.
Safety Risk
If the vehicle is driven with a cracked wheel hub, the wheel hub may break, which would reduce the driver's ability to control the vehicle, possibly resulting in a vehicle crash.
Remedy
All of the affected vehicles have been quarantined at Suzuki dealers prior to being sold. As such, a recall notification letter will not be issued. Suzuki dealers will replace the left and right side front wheel hub assemblies free of charge. Customers may contact Suzuki at 1-877-697-8985.
ON CERTAIN PASSENGER VEHICLES, A FRONT WHEEL BEARING AND HUB ASSEMBLY MAY FRACTURE DUE TO IMPROPER HEAT TREATMENT.
Safety Risk
IF A HUB FRACTURES, IT MAY POTENTIALLY DETACH FROM THE WHEEL KNUCKLE, RESULTING IN THE WHEEL BEING RETAINED ONLY BY THE BRAKE CALIPER ASSEMBLY. AS A RESULT, THE WHEEL MAY SEPARATE FROM THE VEHICLE POTENTIALLY RESULTING IN A CRASH.
Remedy
DEALERS WILL INSPECT BOTH FRONT WHEEL BEARING AND HUB ASSEMBLIES AND REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON JUNE 22, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH DESIGN LEVEL 1, ROCKWELL FF980 SERIES FRONT AXLE. THE FRONT AXLE HUB FLANGE CAN DEVELOP CRACKS DUE TO HIGH STRESS LEVELS.
Safety Risk
CRACKS IN A HUB FLANGE CAN RESULT IN A WHEEL SEPARATION.
Remedy
DEALERS WILL REMOVE AND REPLACE THE FRONT HUBS WITH AN IMPROVED DESIGN LEVEL 2 HUB.
