Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
4,815,661 vehicles affectedMfr ref: U49,U59-U65,U68,U73Updated June 10, 2026
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
On certain vehicles, the connection securing the cable from the 48 V battery to the starter-generator may not have been tightened properly. As a result, the connection could loosen and cause a short circuit and/or a loss of power to the wheels.
Note: This recall only affects certain vehicles equipped with a 2.0L engine.
Safety Risk
A short circuit could increase the risk of a fire. A loss of power to the wheels could increase the risk of a crash.
Remedy
BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, tighten the nuts. The dealer will replace the 48 V battery cable and/or the starter-generator, as necessary.
27 vehicles affectedMfr ref: 12 81 25RCUpdated June 10, 2026
VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. THE AFFECTED VEHICLES WERE BUILT WITH AN IGNITION SWITCH AND WIRING THAT COULD OVERHEAT. HIGH ELECTRICAL CURRENT LOADS PASS THROUGH THE SWITCH WHEN THE BLOWER MOTOR IS OPERATED ON HIGH FOR AN EXTENDED PERIODS OF TIME.
Safety Risk
THIS COULD CAUSE THE IGNITION SWITCH AND WIRING TO OVERHEAT.
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive50, iX M60, i4 eDrive40, i4 M50, and 2023 i760 xDrive hybrid electric vehicles. The high voltage battery combined charging unit (CCU) may not have been manufactured correctly, resulting in improperly connected and/or assembled components inside the CCU.
Safety Risk
An improperly connected or assembled CCU can interrupt electrical power while driving and result in an engine stall, increasing the risk of a crash.
Remedy
Dealers will replace the high voltage battery combined charging unit (CCU), free of charge. Owner notification letters were mailed August 23, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive50, iX M60, i4 eDrive40, i4 M50, and 2023 i760 xDrive hybrid electric vehicles. The high voltage battery combined charging unit (CCU) may not have been manufactured correctly, resulting in improperly connected and/or assembled components inside the CCU.
Safety Risk
An improperly connected or assembled CCU can interrupt electrical power while driving and result in an engine stall, increasing the risk of a crash.
Remedy
Dealers will replace the high voltage battery combined charging unit (CCU), free of charge. Owner notification letters were mailed August 23, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive50, iX M60, i4 eDrive40, i4 M50, and 2023 i760 xDrive hybrid electric vehicles. The high voltage battery combined charging unit (CCU) may not have been manufactured correctly, resulting in improperly connected and/or assembled components inside the CCU.
Safety Risk
An improperly connected or assembled CCU can interrupt electrical power while driving and result in an engine stall, increasing the risk of a crash.
Remedy
Dealers will replace the high voltage battery combined charging unit (CCU), free of charge. Owner notification letters were mailed August 23, 2023. Owners may contact BMW customer service at 1-800-525-7417.
ON CERTAIN VEHICLES, THE TOTALLY INTEGRATED POWER MODULE (TIPM) WAS PROGRAMMED WITH SOFTWARE THAT MAY ALLOW THE ENGINE TO STALL UNDER CERTAIN OPERATING CONDITIONS.
Safety Risk
THIS COULD CAUSE A CRASH WITHOUT WARNING.
Remedy
DEALERS WILL REPROGRAM THE TIPM. THE RECALL BEGAN ON JULY 5, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
On certain motorcycles, the reverser control unit may not have been sealed properly. As a result, water could enter the control unit and cause it to corrode. If this happens, the control unit could short circuit.
Note: This problem could cause the reverse function not to work.
Safety Risk
A short circuit can create the risk of a fire.
Remedy
BMW Motorrad will notify owners by mail and advise you to take your motorcycle to a dealership to replace the reverser control unit relay and related parts.
BMW of North America, LLC (BMW) is recalling certain 2018 230i, 230i xDrive, M240i, M240i xDrive, M2, and X3 xDrive 30i SAV vehicles. These vehicles may have an error in the software for the instrument panel, causing the display to not properly illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays."
Safety Risk
If the display does not illuminate during start up or does not illuminate various control and warning symbols while driving, it can increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will update the instrument cluster display software, free of charge. The recall is expected to begin January 8, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018 230i, 230i xDrive, M240i, M240i xDrive, M2, and X3 xDrive 30i SAV vehicles. These vehicles may have an error in the software for the instrument panel, causing the display to not properly illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays."
Safety Risk
If the display does not illuminate during start up or does not illuminate various control and warning symbols while driving, it can increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will update the instrument cluster display software, free of charge. The recall is expected to begin January 8, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018 230i, 230i xDrive, M240i, M240i xDrive, M2, and X3 xDrive 30i SAV vehicles. These vehicles may have an error in the software for the instrument panel, causing the display to not properly illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays."
Safety Risk
If the display does not illuminate during start up or does not illuminate various control and warning symbols while driving, it can increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will update the instrument cluster display software, free of charge. The recall is expected to begin January 8, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018 230i, 230i xDrive, M240i, M240i xDrive, M2, and X3 xDrive 30i SAV vehicles. These vehicles may have an error in the software for the instrument panel, causing the display to not properly illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays."
Safety Risk
If the display does not illuminate during start up or does not illuminate various control and warning symbols while driving, it can increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will update the instrument cluster display software, free of charge. The recall is expected to begin January 8, 2018. Owners may contact BMW customer service at 1-800-525-7417.
On certain vehicles, the plastic housing in the rear tail lamp assembly can become distorted if the brake lamps remain on for an extended time. This can cause (1) an intermittently inoperative brake/tail lamp bulb or (2) a short circuit that opens a fuse causing inoperative brake lamps (including the center high-mounted stop lamp) or tail lamps. The loss of one of both of the tail lamps/stop lamps could reduce the vehicle's visibility to following drivers and fail to warn others that the vehicle is braking and/or stopped, which could lead to a crash.
Safety Risk
No risk description available.
Remedy
Dealers will replace the lamp socket and, if necessary, the lamp housing assembly.
15,080 vehicles affectedMfr ref: 05052Updated June 10, 2026
NOTE: VEHICLES EQUIPPED WITH V6 ENGINES.
WATER AND ROAD SALT CAN ENTER THE ALTERNATOR THROUGH A PRODUCTION PIN HOLE IN THE BUS BAR POSSIBLY CREATING AN ELECTRICAL SHORT CIRCUIT BETWEEN THE BUS BAR AND THE ALTERNATOR HEAT SHIELD. THIS CONDITION COULD CAUSE OVERHEATING AND RESULT IN AN ENGINE COMPARTMENT FIRE.
Safety Risk
No risk description available.
Remedy
VEHICLES WILL BE INSPECTED AND A MODIFIED HEAT SHIELD WILL BE INSTALLED IF THE VEHICLE WAS OPERATED IN AREAS OF HIGH ROAD SALT USE.
7,430 vehicles affectedMfr ref: 56407Updated June 10, 2026
CHRYSLER IS RECALLING 4,314 MY 2009 DODGE JOURNEY, JEEP GRAND CHEROKEE, COMMANDER AND WRANGLER VEHICLES. WIRING MAY BE REVERSED ON THE STEERING COLUMN CONTROL MODULE DRIVER AIRBAG SQUIB CONNECTOR. THE DRIVER'S AIRBAG MAY NOT DEPLOY AS INTENDED.
Safety Risk
IN THE EVENT OF A CRASH, THE DRIVER'S AIRBAG MAY NOT PROPERLY INFLATE AND MAY NOT BE ABLE TO PROPERLY PROTECT AN OCCUPANT, INCREASING THE RISK OF INJURIES.
Remedy
DEALERS WILL INSPECT THE DRIVER'S AIRBAG SQUIB WIRES AND REPLACE THE STEERING COLUMN CONTROL MODULE FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2009. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
