Volvo Trucks North America (Volvo Trucks) is recalling certain 2020-2021 VAH, VHD, VNL and VNR vehicles. The die cast pedal plate may break at one of its attachment points, possibly resulting in the brake pedal dislodging. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
Safety Risk
A dislodged brake pedal would be inoperable, increasing a risk of a crash.
Remedy
Volvo Trucks will notify owners, and dealers will inspect and replace the pedal plates if required, free of charge. The recall began October 7, 2020. Owners may contact Volvo Trucks customer service at 1-800-458-1552. Volvo Truck's number for this recall is RVXX2004.
Volvo Trucks North America (Volvo) is recalling certain model year 2013-2017 VNL and VNM trucks and certain model year 2017 VNX trucks. In the affected vehicles, incorrect software for controlling the electronic air dryer may result in oil and water contaminating the brake system.
Safety Risk
If the brake system becomes contaminated, braking performance could be affected, increasing the risk of a crash.
Remedy
Volvo will notify owners, and dealers will reprogram the vehicle control module and replace the air dryer filter, free of charge. The recall began on February 16, 2017. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1608.
HONDA HAS NOTIFIED NHTSA OF A DEFECT IN CERTAIN MODEL YEAR 2007 AND 2008 ODYSSEY AND ELEMENT PASSENGER VEHICLES MANUFACTURED BETWEEN JULY 28, 2006 AND AUGUST 21, 2008. AIR CAN ENTER THE VSA MODULAR PUMP DURING AN INITIAL SELF-CHECK PROCESS THAT OCCURS SHORTLY AFTER EACH TIME THE ENGINE IS STARTED. IT IS POSSIBLE FOR ENOUGH AIR TO ENTER THE SYSTEM TO RESULT IN A BRAKE PEDAL THAT FEELS SOFT OR LOWER TO THE FLOOR.
Safety Risk
IF THE OWNER DOES NOT HAVE ANY BRAKE SERVICE OR MAINTENANCE PERFORMED OVER A PERIOD OF MONTHS OR YEARS, THE SYSTEM CAN CONTINUE TO ACCUMULATE ENOUGH AIR TO AFFECT BRAKING PERFORMANCE, INCREASING THE RISK OF A CRASH.
Remedy
HONDA WILL NOTIFY OWNER AND HONDA DEALERS WILL REPAIR THE VSA MODULATOR BY REMOVING ANY EXISTING AIR IN THE BRAKE SYSTEM THEN APPLY SEALANT AND CAPS TO PREVENT AIR FROM ENTERING THE BRAKE SYSTEM FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 3, 2010. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
FORD IS RECALLING MODEL YEAR 2010 F-650 AND F-750 TRUCKS. THE S-CAM TUBES ON THE AIR BRAKE AXLE ASSEMBLIES WERE NOT GREASED AND CORROSION MAY DEVELOP OVER TIME, WHICH MAY RESTRICT RELEASE OF THE SERVICE BRAKE AT THE AFFECTED WHEEL.
Safety Risk
IF THIS OCCURS, IT COULD CAUSE EXCESSIVE BRAKE TEMPERATURES, NOISE, BRAKE FADE, ODOR, SMOKE, BRAKE PULL AND POSSIBLY LONGER STOPPING DISTANCES WHICH COULD INCREASE THE RISK OF A CRASH.
Remedy
DEALERS WILL LUBRICATE THE S-CAM TUBE AND CHECK THE S-CAM FOR FREE MOVEMENT AT ALL FOUR WHEEL LOCATIONS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 16, 2009. OWNERS MAY CONTACT FORD AT 1-866-436-7332 OR THROUGH THE INTERNET AT WWW.FORDOWNER.COM.
VOLVO TRUCKS IS RECALLING 366 MY 2006-2009 VNL TRUCKS EQUIPPED WITH SUPER SINGLE TIRES, BENDIX BRAKE CAM TUBES, AND VOLVO AIR SUSPENSION. THE VIBRATION FREQUENCY FROM THE SUSPENSION WITH SUPER SINGLE TIRES MAY RESULT IN A FATIGUE CRACK OF THE MOUNTING BRACKETS FOR THE BRAKE CAM TUBE.
Safety Risk
IF LEFT UNTREATED, THE CRACK CAN PROPAGATE AND CAUSE FAILURE OF THE BRAKE CAM TUBE SUPPORT BRACKET(S), WHICH CAN RESULT IN LOSS OF BRAKES AT THE CORRESPONDING WHEEL END INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL ADD A SUPPORT BRACKET TO THE BRAKE CAM TUBE. THE RECALL BEGAN ON JUNE 30, 2009. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
CERTAIN HARSCO WHEEL MODIFICATION GROUPS CONTAINING ACCURIDE STEEL RIMS, P/NOS. 203237 AND 203738; ACCURIDE ALUMINUM RIMS, P/N 203712; AND GKN STEEL RIMS, P/N 203688, SOLD AS MODIFICATION EQUIPMENT FOR CERTAIN 2005-2007 FORD F-250/F-350 4X4 PICKUP TRUCKS TO MODIFY TRACK WIDTH OF FRONT AND REAR AXLES. THE RIMS PROVIDED IN THESE WHEEL MODIFICATION GROUPS WEAR THROUGH THE OEM BRAKE LINES.
Safety Risk
BRAKE FAILURE CAN OCCUR, POSSIBLY RESULTING IN A VEHICLE CRASH.
Remedy
HARSCO WILL NOTIFY OWNERS AND PROVIDE A REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS FREE OF CHARGE. THE RECALL BEGAN IN SEPTEMBER 2006. OWNERS MAY CONTACT HARSCO AT 507-235-7112.
CERTAIN TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." AN INTERNAL CONTROL AND CHECK VALVE WITHIN THE AIR BRAKE APPLICATION VALVE ASSEMBLY WAS CONFIGURED IMPROPERLY, PREVENTING AIR FROM FLOWING THROUGH THE BRAKE SYSTEM AS DESIGNED. IN THE EVENT OF AN EMERGENCY STOP, THE VEHICLE'S STOPPING DISTANCE WOULD BE INCREASED.
Safety Risk
IF STOPPING DISTANCE WAS LIMITED, A VEHICLE CRASH COULD RESULT.
Remedy
DEALERS WILL REPLACE THE AIR BRAKE APPLICATION VALVE ASSEMBLY ON C-SERIES OR REROUTE THE AIR BRAKE LINES ON T-SERIES FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 20, 2006. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, GMC AT 1-866-996-9463 AND ISUZU AT 1-800-255-6727.
CERTAIN MEDIUM DUTY CHASSIS CABS FAIL TO COMPLY TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE AIR BRAKE LINES MAY BE MISROUTED BETWEEN THE PRIMARY AND SECONDARY RESERVOIR TANKS OF THE AIR BRAKE SYSTEM.
Safety Risk
IF THE AIR BRAKE LINES ARE MISROUTED, AND THE AIR BRAKE SYSTEM EXPERIENCES A LOSS OF AIR FROM THE PRIMARY AIR TANK, THE VEHICLE WILL NOT HAVE SERVICE AIR BAKE FUNCTION, INCREASING THE RISK OF A CRASH.
Remedy
FORD WILL INSPECT THE AIR BRAKE LINE ROUTING AND IF NECESSARY, REPAIR THE VEHICLE. OWNER NOTIFICATION BEGAN ON SEPTEMBER 12, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-248-0186.
VEHICLE DESCRIPTION: DUAL STEER CLASS 8 HEAVY DUTY TRUCKS. THE FRONT STEER AXLE BRAKES DO NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 121, "AIR BRAKE SYSTEMS."
Safety Risk
A SLOW BRAKE RELEASE TIME CAN CAUSE PREMATURE BRAKE WEAR WHICH IF LEFT UNCHECKED COULD LEAD TO BRAKE FAILURE AND VEHICLE CRASH.
Remedy
DEALERS WILL INSTALL A RELAY VALVE IN THE FRONT STEERING AXLE BRAKE SYSTEM.
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH MERITOR AIR BRAKE AUTOMATIC SLACK ADJUSTERS. SOME OF THE AUTOMATIC SLACK ADJUSTERS HAD INSUFFICIENT TORQUE APPLIED TO THE GUIDE PAWL CAP SCREW.
Safety Risk
WITHOUT SUFFICIENT TORQUE ON THE GUIDE PAWL CAP SCREW, THE BRAKES COULD GRADUALLY LOSE ADJUSTMENT, INCREASING THE VEHICLE STOPPING DISTANCE.
Remedy
DEALERS WILL CHECK THE TORQUE ON THE AUTOMATIC SLACK ADJUSTER GUIDE PAWL. IF THERE IS NO TORQUE, THE BRAKES WILL BE ADJUSTED AND THE GUIDE PAWL WILL BE TIGHTENED TO 15-20 FT. LBS.
THE TRACTION SOLENOID EXHAUST CAN BE OBSTRUCTED DUE TO INADEQUATE DRAINAGE AND A BUILD-UP OF ROAD CONTAMINATION BETWEEN THE MOUNTING BRACKET AND THE SOLENOID HOUSING. THE OBSTRUCTED EXHAUST PREVENTS THE RELAY VALVE CONTROL AIR PRESSURE FROM VENTING AFTER A DIFFERENTIAL BRAKING TRACTION EVENT.
Safety Risk
THIS CONDITION WOULD KEEP THE REAR AXLE SERVICE BRAKES APPLIED WITHOUT ANY BRAKE PEDAL MOVEMENT BY THE DRIVER INCREASING THE RISK OF A VEHICLE ACCIDENT.
Remedy
DEALERS WILL REMOVE THE SUSPECT VALVE AND INSTALL A NEW VALVE THAT HAS A MODIFIED SOLENOID HOUSING WHICH WILL ALLOW FOR SUFFICIENT DRAINAGE AND A NEW VALVE MOUNTING BRACKET WITH INCREASED HEIGHT TO REDUCE ENTRY OF CONTAMINATION.
Also recalled in Canada