1,872 of 26,042 recalls from Transport Canada and NHTSA.
On certain Hypermotard 950 SP models, the side stand may break. If this happens, the motorcycle could fall over while it is parked.
A motorcycle that falls over could create a risk of injury to nearby people.
Ducati will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the side stand.
General Motors LLC (GM) is recalling certain 2016-2017 Buick Envision vehicles manufactured February 4, 2016, to April 25, 2016. The Tire and Loading Information label may display the incorrect maximum weight information. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Incorrect weight information may cause an owner to overload the vehicle. Overloading may reduce vehicle control, increasing the risk of a crash.
GM will notify owners, and dealers will install a corrected label as necessary, free of charge. The began on August 22, 2016. Owners may contact Buick customer service at 1-800-521-7300. GM's number for this recall is 56340.
Mercedes-Benz USA, LLC (Mercedes Benz) is recalling certain model year 2013 GLK350 and GLK350 4-Matic vehicles, manufactured from May 31, 2012, through August 2, 2012, for failing to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment." The affected vehicles have voltage in the parking lamp circuit that exceeds the maximum value listed.
The higher illumination level may cause glare to oncoming vehicles, increasing the risk of a crash.
Mercedes Benz will notify owners, and dealers will update the software calibration number (SCN) of the subject electronic control unit. The recall began in September 2014. Owners may contact Mercedes Benz at 1-800-367-6372.
CERTAIN MINI VANS FAIL TO COMPLY TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS." AN INCORRECT GROSS AXLE WEIGHT RATING (GAWR) WAS INDICATED ON THE CERTIFICATION LABEL.
No risk description available.
OWNERS WILL BE MAILED ACCURATE CERTIFICATION LABELS AND INSERTS FOR THE OWNER'S MANUAL. OWNER NOTIFICATION BEGAN JUNE 12, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500.
Certain motorcycles fail to conform to the requirements of Canada Motor Vehicle Safety Standard 120 – Tire Selection and Rims. Due to a typographical error, the size of the front tire, as indicated on the compliance label, is incorrectly identified as 130/70-18M/C63V instead of 130/70R18M/C63V.
No risk description available.
Dealers will replace the compliance label.
Certain vehicles do not comply with CMVSS 205 - Glazing materials. The windshields on these vehicles were produced without the "ASI" mark as required by American Standards Institute (ANSI) Z26.1. These windshields fully meet all of the requirements of standard 205.
No risk description available.
Since the absence of the "ASI" mark is highly unlikely to produce any risk of injury, no corrective action will be taken.
On certain vehicles, the warning label for the engine block heater cable is written in English only. As a result, a French user may not receive important safety information about how to use the engine block heater. A label that is not provided in both official languages could create confusion.
User confusion could increase the risk of injury when trying to use the block heater.
The company will mail each owner a new label for the block heater cable. If you would like help installing the label, you can contact a dealer for assistance.
On certain vehicles, the tell-tale (warning light) for the antilock brake system (ABS) doesn't light up in the instrument cluster when you start the vehicle. Canadian regulations require the ABS tell-tale to turn on during the start-up sequence to tell you that the ABS is working. Note: The braking system will continue to work normally, and the ABS tell-tale will turn on when there is a problem with the ABS.
If the ABS tell-tale does not turn on during start-up, you may not know if the ABS is working correctly. A problem with the ABS will cause a warning message to appear on the vehicle's central information display screen, even if the ABS tell-tail fails.
BMW will notify owners by mail and instruct you to take your vehicle to a dealer update the vehicle software.
CERTAIN PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION."
SOME OF THESE VEHICLES INCLUDE INCORRECT STATEMENTS ON ONE OF THE AIR BAG WARNING LABELS.
OWNERS WILL BE PROVIDED WITH CORRECT LABELS AND INSTALLATION INSTRUCTIONS. OWNER NOTIFICATION BEGAN ON JUNE 4, 2004. OWNERS SHOULD CONTACT CHEVROLET AT 1-800-630-2438 OR GMC AT 1-866-996-9463.
THESE VEHICLES MAY HAVE BEEN BUILT WITH IGNITION CONTROL (IC) MODULES WHICH MAY FAIL AND CAUSE A NO START CONDITION. A FAULTY IC MODULE WOULD NOT BE IN COMPLIANCE WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS.
No risk description available.
VEHICLES WILL BE INSPECTED AND IC MODULE WILL BE REPLACED IF NECESSARY.
Certain vehicles do not comply with the requirements of CMVSS 135. The brake fluid master cylinder reservoir is recessed and oriented in the engine compartment beneath a leaf screen, such that the brake fluid warning statement embossed on the top of the reservoir body is not visible by direct view.
No risk description available.
Jaguar will mail letters to all registered owners which will include labels containing the required warning statement and installation instructions.
Volkswagen Group of America, Inc. (Audi) is recalling certain 2022 A3 Sedan and S3 Sedan vehicles. The child seat anchorage fitting sleeves are incorrectly marked with a different symbol than the one described in the owner's manual. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 225, "Child Restraint Anchorage Systems."
An incorrectly marked child restraint anchorage may cause confusion during child seat installation, resulting in a child seat being improperly secured and increasing the risk of injury during a crash.
Dealers will replace all four fitting sleeves, free of charge. Owner notification letters were mailed May24, 2022. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 72M7.
Volkswagen Group of America, Inc. (Audi) is recalling certain 2022 A3 Sedan and S3 Sedan vehicles. The child seat anchorage fitting sleeves are incorrectly marked with a different symbol than the one described in the owner's manual. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 225, "Child Restraint Anchorage Systems."
An incorrectly marked child restraint anchorage may cause confusion during child seat installation, resulting in a child seat being improperly secured and increasing the risk of injury during a crash.
Dealers will replace all four fitting sleeves, free of charge. Owner notification letters were mailed May24, 2022. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 72M7.
THESE VEHICLES MAY NOT COMPLY WITH CMVSS 1103 - EXHAUST EMISSIONS.
No risk description available.
No remedy description available.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2021 Tracer 900 GT (MTT9GTM) motorcycles. The Vehicle Identification Number (VIN) printed on the Federal Certification label may not match the VIN stamped on the vehicle. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."
An owner that references an incorrect VIN label may not recognize their vehicle is involved in a safety recall, and may not have the recall remedy performed, which could increase the risk of injury, fire, or a crash.
Yamaha will notify owners, and dealers will install a correct certification label, free of charge. Owner notification letters were mailed November 12, 2021. Owners may contact Yamaha customer service at 1-800-962-7926. Yamaha's number for this recall is 990151.
THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 1105 - EVAPORATIVE EMISSIONS. V.I.N. RANGE - JM1HC2210J0100001 TO JM1HC2216J0113013
No risk description available.
No remedy description available.
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2010 TUCSON VEHICLES MANUFACTURED FROM FEBRUARY 27, 2010, THROUGH APRIL 17, 2010 FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT," FOR THE PHOTOMETRY REQUIREMENTS OF THE REAR REFLECTOR ASSEMBLIES INSTALLED IN THE REAR BUMPERS.
THIS COULD LEAD TO REDUCED VISIBILITY OF THE REAR OF THE VEHICLE, INCREASING THE RISK OF A CRASH.
DEALERS WILL REPLACE THE REAR REFLECTOR ASSEMBLIES, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING JUNE 2011. OWNERS MAY CONTACT HYUNDAI'S CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1.
Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1.
Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1.
We may earn a commission for purchases made through these links.
