Kawasaki Motors Corp., U.S.A. (Kawasaki) is recalling certain 2019-2020 NINJA ZX-10R, NINJA ZX-10R ABS, and NINJA ZX-10R ABS KRT EDITION motorcycles. The engine control unit (ECU) programming may cause the engine to backfire when the quick shift function is used under high engine load, possibly resulting in damage to the air suction valves.
Safety Risk
Damaged air suction valves may allow high temperature exhaust gas to blow back through and melt surrounding parts, increasing the risk of a fire.
Remedy
Kawasaki will notify owners, and dealers will reprogram the ECU and inspect the air suction valves and surrounding parts, replacing them as necessary. All repairs will be performed free of charge. This recall began June 8, 2020. Owners may contact Kawasaki customer service at 1-866-802-9381. Kawasaki's number for this recall is MC20-02.
1,529 vehicles affectedMfr ref: MC20-02Updated June 10, 2026
ON CERTAIN PASSENGER AND SPORT UTILITY VEHICLES, THE COVER BOLTS FOR THE ENGINE OIL CONTROL VALVE MAY NOT BE SUFFICIENTLY TIGHTENED, ALLOWING OIL TO LEAK FROM AROUND THE COVER GASKET.
Safety Risk
IF LEAKING OIL CONTACTS COMPONENTS OPERATING AT HIGH TEMPERATURES, A FIRE COULD RESULT IN THE ENGINE COMPARTMENT.
Remedy
DEALERS WILL INSPECT AND RETIGHTEN THE OIL-FLOW CONTROL VALVE COVER BOLTS. THE RECALL BEGAN ON OCTOBER 8, 2004. OWNERS SHOULD CONTACT SUBARU AT 1-800-782-2783.
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2016 GSX-S1000 motorcycles manufactured July 8, 2015, to July 29, 2015, GSX-S1000A motorcycles manufactured July 10, 2015, to August 24, 2015 and, and GSX-S1000FA motorcycles manufactured July 21, 2015, to July 27, 2015. The affected motorcycles may leak brake fluid from the front brake calipers.
Safety Risk
If the front brake calipers leak brake fluid, braking performance would be reduced, increasing the risk of a crash.
Remedy
Suzuki has notified owners, and dealers will replace the front brake calipers, free of charge. The recall began on December 1, 2015. Owners may contact Suzuki customer service at 1-714-572-1490. Suzuki's number for this recall is 2A48.
600 vehicles affectedMfr ref: 2A48Updated June 10, 2026
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2016 GSX-S1000 motorcycles manufactured July 8, 2015, to July 29, 2015, GSX-S1000A motorcycles manufactured July 10, 2015, to August 24, 2015 and, and GSX-S1000FA motorcycles manufactured July 21, 2015, to July 27, 2015. The affected motorcycles may leak brake fluid from the front brake calipers.
Safety Risk
If the front brake calipers leak brake fluid, braking performance would be reduced, increasing the risk of a crash.
Remedy
Suzuki has notified owners, and dealers will replace the front brake calipers, free of charge. The recall began on December 1, 2015. Owners may contact Suzuki customer service at 1-714-572-1490. Suzuki's number for this recall is 2A48.
600 vehicles affectedMfr ref: 2A48Updated June 10, 2026
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2016 GSX-S1000 motorcycles manufactured July 8, 2015, to July 29, 2015, GSX-S1000A motorcycles manufactured July 10, 2015, to August 24, 2015 and, and GSX-S1000FA motorcycles manufactured July 21, 2015, to July 27, 2015. The affected motorcycles may leak brake fluid from the front brake calipers.
Safety Risk
If the front brake calipers leak brake fluid, braking performance would be reduced, increasing the risk of a crash.
Remedy
Suzuki has notified owners, and dealers will replace the front brake calipers, free of charge. The recall began on December 1, 2015. Owners may contact Suzuki customer service at 1-714-572-1490. Suzuki's number for this recall is 2A48.
600 vehicles affectedMfr ref: 2A48Updated June 10, 2026
On certain vehicles equipped with a left side cargo door, and originally sold in or currently operated in areas of heavy road salt usage during winter months (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), the fuel filler pipe could corrode and become perforated. This could allow fuel to leak onto the ground while refuelling the vehicle. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will replace the fuel filler pipe.
951 vehicles affectedMfr ref: 12166Updated June 10, 2026
On certain motorcycles equipped with a manual transmission, incorrect programming in the engine control unit (ECU) may cause the engine to stall. This could happen when the clutch lever is pulled in, with the transmission in 2nd gear or higher, and a closed throttle.
Safety Risk
A sudden engine stall could increase the risk of a crash.
Remedy
Honda will notify owners by mail and instruct you to take your motorcycle to a dealership to update the engine control unit (ECU) software.
374 vehicles affectedMfr ref: MK93Updated June 10, 2026
Certain medium duty pickup trucks equipped with air brakes that include the optional trailer package fail to comply with the requirements of C.M.V.S.S. no. 121, "air brake systems." the air brake lines connected to the tractor protection valve are misrouted. A leak in the primary air circuit or secondary air circuit could result in a reduction, or loss of the trailer brake effectiveness as a result, increasing the risk of a crash.
Safety Risk
No risk description available.
Remedy
Dealers will re-route the airlines connected to the tractor protection valve.
6 vehicles affectedMfr ref: 02S31Updated June 10, 2026
AT HIGH AMBIENT TEMPERATURES WHEN THE VEHICLE IS PARKED AND THEN A SHORT TIME LATER RESTARTED, IT IS POSSIBLE FOR A SATURATED CHARCOAL CANISTER TO EXPEL FUEL VAPOR FROM THE INLET VENT OF THE CANISTER ONTO THE TOP OF A HOT ELECTRIC FAN PRERESISTOR CAUSING AN UNDERHOOD FIRE.
Safety Risk
No risk description available.
Remedy
THE FUEL VAPOR CANISTER VENT LINE WILL BE REPOSITIONED AWAY FROM THE ELECTRIC FAN PRERESISTOR. ALSO, THE PRERESISTOR WILL HAVE A LARGER HEAT SHIELD AND A FUSED WIRING HARNESS INSTALLED.
234 vehicles affectedMfr ref: 94-0123Updated June 10, 2026
ON VEHICLES EQUIPPED WITH PLASTIC FUEL TANKS, THE FUEL TANK SENDING UNIT GASKET MAY CRACK, CREATING THE POTENTIAL FOR FUEL LEAKAGE AND VAPOUR LEVELS IN EXCESS OF C.M.V.S.S 1105 - EVAPORATIVE EMISSIONS. ALSO, IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD RESULT.
Safety Risk
No risk description available.
Remedy
FUEL TANK SENDING UNIT GASKET WILL BE REPLACED ON AFFECTED VEHICLES.
32,714 vehicles affectedMfr ref: 624Updated June 10, 2026
Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018 Ninja H2 SX, Ninja H2 SX SE, and 2019-2021 Ninja H2 SX SE+ motorcycles. An insufficient amount of grease in the rear hub needle-bearing may cause it to fail, which could result in the rear wheel locking up.
Safety Risk
Rear wheel lock-up can increase the risk of a crash.
Remedy
Dealers will replace the needle-bearing, free of charge. Owner notification letters were mailed August 23, 2021. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC21-04.
857 vehicles affectedMfr ref: MC21-04Updated June 10, 2026
Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018 Ninja H2 SX, Ninja H2 SX SE, and 2019-2021 Ninja H2 SX SE+ motorcycles. An insufficient amount of grease in the rear hub needle-bearing may cause it to fail, which could result in the rear wheel locking up.
Safety Risk
Rear wheel lock-up can increase the risk of a crash.
Remedy
Dealers will replace the needle-bearing, free of charge. Owner notification letters were mailed August 23, 2021. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC21-04.
857 vehicles affectedMfr ref: MC21-04Updated June 10, 2026
Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018 Ninja H2 SX, Ninja H2 SX SE, and 2019-2021 Ninja H2 SX SE+ motorcycles. An insufficient amount of grease in the rear hub needle-bearing may cause it to fail, which could result in the rear wheel locking up.
Safety Risk
Rear wheel lock-up can increase the risk of a crash.
Remedy
Dealers will replace the needle-bearing, free of charge. Owner notification letters were mailed August 23, 2021. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC21-04.
857 vehicles affectedMfr ref: MC21-04Updated June 10, 2026
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 LEXUS LX570, 2003 THROUGH 2009 TOYOTA 4RUNNER, AND 2006 THROUGH 2010 RAV4 VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.
Safety Risk
A STUCK OPEN ACCELERATOR PEDAL MAY RESULT IN VERY HIGH VEHICLE SPEEDS AND MAKE IT DIFFICULT TO STOP THE VEHICLE, WHICH COULD CAUSE A CRASH, SERIOUS INJURY OR DEATH.
Remedy
THE REMEDY IS NOW AVAILABLE. THE SAFETY RECALL BEGAN EARLY APRIL 2011. THE REMEDY WILL INVOLVE MODIFICATION OR REPLACEMENT OF THE ACCELERATOR PEDAL AND REPLACEMENT OF ANY TOYOTA ALL-WEATHER FLOOR MAT. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331 OR LEXUS AT 1-800-255-3987.
1,363,244 vehicles affectedMfr ref: 9LGUpdated June 10, 2026
Quality Vans (Quality Vans) is recalling certain 2020-2023 Ford Transit vans equipped with Onan QG 2800i EVAP generators, part number 2.8HGLAA-8303A. The fuel hose between the inline fuel filter and the Injection Pump Module (IPM) may not be properly secured, which can cause a gas leak.
Safety Risk
A gasoline leak in the presence of an ignition source may increase the risk of fire.
Remedy
Dealers will inspect and replace the fuel hose and clamps as necessary, free of charge. Owner notification letters were mailed August 4, 2023. Owners may contact Quality Vans customer service at 1-480-464-7007.
On certain vehicles, the mounting holes for the tie rod ends were not manufactured correctly. As a result, the front tie rods may not fit properly. This could lead to damage during assembly and servicing. Over time, parts that do not fit correctly could separate and cause a loss of steering control.
Safety Risk
A loss of steering control could create the risk of a crash.
Remedy
Subaru will notify owners by mail and instruct you to take your car to a dealer to replace the left and right steering knuckles, tie rod ends, and related hardware.
94 vehicles affectedMfr ref: WRL-21Updated June 10, 2026
Hyundai Motor America (Hyundai) is recalling certain 2023 IONIQ 5, IONIQ 6, and Genesis GV60 vehicles. The rear inner driveshaft may have been improperly heat-treated, allowing it to break under load and resulting in a loss of drive power.
Safety Risk
A loss of drive power increases the risk of a crash.
Remedy
Dealers will replace the rear inner driveshaft, free of charge. Owner notification letters were mailed March 29, 2024. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's numbers for this recall are 253(H), 017G(G).
