ROUSH PERFORMANCE PRODUCTS IS RECALLING CERTAIN 2011 FORD E-SERIES VANS EQUIPPED WITH 5.4 OR 6.8 LITER ENGINES THAT HAVE BEEN ALTERED BY ROUSH TO OPERATE USING THE ROUSH LIQUID PROPANE AUTOGAS FUEL SYSTEM. A VALVE IN THE SYSTEM MAY HAVE BEEN MISMACHINED ALLOWING A PROPANE LEAK.
Safety Risk
A PROPANE LEAK IN THE PRESENCE OF AN IGNITION SOURCE MAY RESULT IN A VEHICLE FIRE.
Remedy
ROUSH WILL REPLACE THE DEFECTIVE VALVE WITH A CORRECTLY MACHINED ONE. ALL THE AFFECTED VEHICLES HAVE BEEN REPAIRED, THEREFORE, AN OWNER NOTIFICATION LETTER WILL NOT BE ISSUED FOR THIS CAMPAIGN. OWNERS MAY CONTACT ROUSH AT 1-734-466-6255.
THE RIGHT HAND SPINDLE NUT WAS NOT PROPERLY TIGHTENED DURING ASSEMBLY. THIS CAN CAUSE PREMATURE WHEEL BEARING FAILURE AND OVER TIME, THE SPINDLE CAN FRACTURE.
Safety Risk
THIS WOULD CAUSE THE WHEEL TO SEPARATE FROM THE AXLE AND RESULT IN A VEHICLE CRASH.
Remedy
DEALERS WILL INSPECT THE TORQUE ON THE RIGHT HAND FRONT SPINDLE NUT. IF THE SPINDLE NUT IS UNDERTORQUED THE DEALER WILL REPLACE THE RIGHT HAND FRONT WHEEL BEARING ASSEMBLY AND THE SPINDLE NUT WILL BE REPLACED.
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario,
Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), the forward attachment point for the lower control arm may separate from the vehicle's subframe. This could affect vehicle handling and increase the risk of a crash causing injury and/or property damage.
Safety Risk
No risk description available.
Remedy
Dealers will install a newly designed reinforcement cross-brace.
13,182 vehicles affectedMfr ref: 7514DUpdated June 10, 2026
On certain motorcycles, the O-ring of the fuel tank internal breathing system valve plug may have been damaged during installation. This could result in a fuel leak, which in the presence of an ignition source could increase the risk of fire causing injury and/or damage to property.
Safety Risk
No risk description available.
Remedy
Dealers will replace the plug and the O-ring with new components.
On certain vehicles equipped with 17 inch alloy wheels, these wheels may have a casting defect(s) from which a crack(s) may propagate as the vehicle is being driven. If a sufficient number of cracks develop, the wheel could fail and separate from the mounting hub.
On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants.
On certain vehicles, a microprocessor in the airbag control module could cause one or more airbag(s) to deploy when placing the key in the ignition ON position, or when starting the vehicle. In this case, unexpected deployment of the airbag(s) could cause serious injury if an occupant is too close to the deploying airbag(s). In addition, the Battery Safety Terminal (BST) may also be activated. It this happens, the starter cable would become disconnected from the battery, and the engine could not be restarted.
On certain vans, club wagons, cutaway's and stripped chassis', the driveshaft may have been manufactured with a slip yoke that has cracks. Over time, these cracks may propagate, allowing the slip yoke to break while the vehicle is in motion, causing the driveshaft to detach from the vehicle. Separation of the driveshaft would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. In addition, once separated from the vehicle the driveshaft could cause vehicle damage or damage to other vehicles and property, and could potentially result in personal injury or death to bystanders.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and, if necessary, replace the driveshaft.
450 vehicles affectedMfr ref: 08S04Updated June 10, 2026
On certain vehicles, the front lower control arm ball joints could experience a loss of lubrication, which could eventually allow the knuckle to separate from the lower control arm while the vehicle is in operation. A ball joint separation could possibly result in a loss of directional control.
Safety Risk
No risk description available.
Remedy
Dealer will replace both front lower control arm ball joints.
674 vehicles affectedMfr ref: C03Updated June 10, 2026
THE OUTER FRONT WHEEL BEARINGS MAY EXPERIENCE INADEQUATE LUBRICATION THAT MAY CAUSE WHEEL BEARING FAILURE. THIS CONDITION COULD RESULT IN FRONT WHEEL SPINDLE DAMAGE AND LOSS OF VEHICLE CONTROL.
Safety Risk
No risk description available.
Remedy
No remedy description available.
128,293 vehicles affectedMfr ref: 9C09 9P12 9006Updated June 10, 2026
Hyundai Motor America (Hyundai) is recalling certain 2020-2022 Accent, 2021-2022 Elantra, and 2021-2022 Elantra HEV vehicles. In the event of a crash, the front driver-side and/or passenger-side seat belt pretensioners may explode upon deployment.
Safety Risk
An exploding seat belt pretensioner can project metal fragments into the vehicle, strike vehicle occupants, and result in injury.
Remedy
Dealers will secure the seat belt pretensioner(s) with a cap, free of charge. Owner notification letters were mailed August 28, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 229. This recall expands and replaces NHTSA recall numbers 21V-796, 22V-069, 22V-218, and 22V-123 for Accent, Elantra, and Elantra HEV vehicles. All Accent, Elantra, and Elantra HEV vehicles already repaired under the previous recalls will need to have the new remedy completed.
230,233 vehicles affectedMfr ref: 229Updated June 10, 2026
Hyundai Motor America (Hyundai) is recalling certain 2020-2022 Accent, 2021-2022 Elantra, and 2021-2022 Elantra HEV vehicles. In the event of a crash, the front driver-side and/or passenger-side seat belt pretensioners may explode upon deployment.
Safety Risk
An exploding seat belt pretensioner can project metal fragments into the vehicle, strike vehicle occupants, and result in injury.
Remedy
Dealers will secure the seat belt pretensioner(s) with a cap, free of charge. Owner notification letters were mailed August 28, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 229. This recall expands and replaces NHTSA recall numbers 21V-796, 22V-069, 22V-218, and 22V-123 for Accent, Elantra, and Elantra HEV vehicles. All Accent, Elantra, and Elantra HEV vehicles already repaired under the previous recalls will need to have the new remedy completed.
230,233 vehicles affectedMfr ref: 229Updated June 10, 2026
VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE STEER AXLE WHEEL BEARING JAM NUT LOCK WASHER MAY NOT HAVE BEEN BENT OVER THE JAM NUT AFTER THE WHEEL BEARINGS WERE ADJUSTED.
Safety Risk
IF THIS CONDITION EXISTS, THE JAM NUT AND WHEEL BEARING ADJUSTING NUT CAN BACK OFF THE SPINDLE ALLOWING THE WHEEL AND THE BRAKE DRUM ASSEMBLY TO SEPARATE FROM THE VEHICLE INCREASING THE RISK OF A VEHICLE CRASH.
Remedy
DEALERS WILL INSPECT THE STEERING AXLE WHEEL BEARING JAM NUT LOCK WASHER TO DETERMINE IF IT IS BENT OVER THE JAM NUT, AND IF NOT, REPAIR AS REQUIRED.
ON CERTAIN PASSENGER VEHICLES, PROLONGED HIGH UNDER-HOOD TEMPERATURES MAY CAUSE THE POWER STEERING HOSE TO DETERIORATE PREMATURELY CAUSING THE HOSE TO CRACK AND LEAK POWER STEERING FLUID.
Safety Risk
POWER STEERING FLUID LEAKING ONTO A HOT CATALYTIC CONVERTER WILL GENERATE SMOKE AND POSSIBLY LEAD TO AN UNDER-HOOD FIRE.
Remedy
DEALERS WILL INSTALL A NEW HEAT RESISTANT POWER STEERING HOSE FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 12, 2007. OWNERS MAY CONTACT HONDA AT 800-382-2238.
ON CERTAIN COUPE AND SEDAN PASSENGER VEHICLES, THE POSITIONING OF THE POWER STEERING DELIVERY HOSE CAN ALLOW IT TO COME INTO CONTACT WITH PART OF THE EXHAUST MANIFOLD.
Safety Risk
THIS COULD ALLOW THE DELIVERY HOSE TO LEAK POWER STEERING FLUID ONTO THE HOT EXHAUST MANIFOLD AND COULD CAUSE A VEHICLE FIRE.
Remedy
DEALERS WILL INSPECT THE POSITION OF THE POWER STEERING DELIVERY HOSE AND INSTALL A POSITIONING CLAMP. IF THE HOSE IS DAMAGED AND/OR CANNOT BE MOVED INTO THE PROPERLY ALIGNED POSITION, THE HOSE WILL BE REPLACED WITH A NEW ONE. OWNER NOTIFICATION BEGAN MAY 20, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MASERATI AT 1-877.696.2737.
On certain vehicles equipped with a 2.0L TDI engine, the diesel fuel filter element may not seal properly and could leak. Diesel fuel leakage may ignite on a hot surface and cause a fire which could result in property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will replace the fuel filter element.
14 vehicles affectedMfr ref: 20R7/W3Updated June 10, 2026
On certain motorcycles, an incorrect screw may have been used to fasten the swingarm to the rear suspension linkage. If the connection fails, the motorcycle could become unstable, which could result in a crash causing property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and, if necessary, replace the retaining screw.
35 vehicles affectedMfr ref: RCL-12-004Updated June 10, 2026
HONDA IS RECALLING CERTAIN MODEL YEAR 2001-2010, AND MODEL YEAR 2012 GL1800 GOLDWING MOTORCYCLES. UNDER CERTAIN CONDITIONS, THERE IS A POSSIBILITY THAT THE COMBINED BRAKING SYSTEM'S SECONDARY MASTER CYLINDER MAY CAUSE THE REAR BRAKE TO DRAG.
Safety Risk
UNEXPECTED BRAKING INCREASES THE RISK OF A CRASH, AND RIDING THE MOTORCYCLE WITH THE REAR BRAKE DRAGGING MAY GENERATE ENOUGH HEAT TO CAUSE THE REAR BRAKE TO CATCH FIRE.
Remedy
HONDA WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE SECONDARY MASTER CYLINDER AND IF NECESSARY, REPLACE IT, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 6, 2012. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-866-784-1870.
126,000 vehicles affectedMfr ref: S03Updated June 10, 2026
On certain vehicles, cracks could develop in the fuel vent hose. If (1) the fuel tank is overfilled, not allowing excess fuel in the vent hose to flow back into the tank, (2) the vehicle is driven only a short distance after refueling and, (3) there is subsequently significant heating of the fuel tank, the fuel in the tank can expand into the vent hose and leak fuel. Fuel leakage in the presence of an ignition source can result in a fire.
Safety Risk
No risk description available.
Remedy
Fuel tank vent hose will be replaced.
39,378 vehicles affectedMfr ref: 00S59Updated June 10, 2026
