Ford Motor Company (Ford) is recalling certain 2024-2026 Ranger vehicles. The sun visor or headliner wiring harnesses may be improperly positioned or have excessive tape thickness, which can result in damaged wires.
Safety Risk
Damaged wires can create an electrical short and cause a fire in the A-pillar area, increasing the risk of injury or a crash.
Remedy
Dealers will inspect the wiring for damage and update the body control module software. Damaged wiring harnesses will be replaced as necessary. All repairs will be performed free of charge. This will be a Phased campaign. Phase 1 will include 2025 model year vehicles. Owners will be notified by mail the week of 5/31/2026. Phase 2 will include 2026 model year vehicles and Phase 3 will include 2024 model year vehicles. Owners will be notified by mail the week of 6/29/2026 for Phase 2 and the week of 7/27/2026 for Phase 3. Interim letters, notifying owners of the safety risk, were mailed May 5, 2026. Additional letters will be sent once the remedy is available, anticipated in August 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S29. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on April 17, 2026.
140,201 vehicles affectedMfr ref: 26S29Updated June 10, 2026
On certain B700, C600, CL9000, F700, LN600 and W9000 vehicles equipped with eaton anti-lock air brake controllers and produced at the kentucky turck plant. A nylon piston within the pneumatic valve system can increase in size when exposed to certain quantities of typical air brake contaminants that may accumulate due to lack of air brake maintenance. The piston could momentarily stick and/or jam in the valve housing causing a temporary or permanent loss of braking to the affected axle.
v79144
Safety Risk
No risk description available.
Remedy
No remedy description available.
550 vehicles affectedMfr ref: 343Updated June 10, 2026
Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Versa Sedan vehicles manufactured July 16, 2013, to January 29, 2014, 2013-2014 Cube vehicles manufactured July 3, 2013, to October 21, 2013, and 2013-2014 Juke vehicles manufactured July 3, 2013, to October 22, 2013. When exposed to hot temperatures, the affected vehicles have an engine start/stop button that may stick inside the button housing.
Safety Risk
If the engine start/stop button gets stuck in the housing, road vibrations may cause the engine to shut off unexpectedly while the vehicle is being driven, increasing the risk of a crash.
Remedy
Nissan will notify owners, and dealers will modify the start/stop switch housing, free of charge. The recall began on August 4, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Versa Sedan vehicles manufactured July 16, 2013, to January 29, 2014, 2013-2014 Cube vehicles manufactured July 3, 2013, to October 21, 2013, and 2013-2014 Juke vehicles manufactured July 3, 2013, to October 22, 2013. When exposed to hot temperatures, the affected vehicles have an engine start/stop button that may stick inside the button housing.
Safety Risk
If the engine start/stop button gets stuck in the housing, road vibrations may cause the engine to shut off unexpectedly while the vehicle is being driven, increasing the risk of a crash.
Remedy
Nissan will notify owners, and dealers will modify the start/stop switch housing, free of charge. The recall began on August 4, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Versa Sedan vehicles manufactured July 16, 2013, to January 29, 2014, 2013-2014 Cube vehicles manufactured July 3, 2013, to October 21, 2013, and 2013-2014 Juke vehicles manufactured July 3, 2013, to October 22, 2013. When exposed to hot temperatures, the affected vehicles have an engine start/stop button that may stick inside the button housing.
Safety Risk
If the engine start/stop button gets stuck in the housing, road vibrations may cause the engine to shut off unexpectedly while the vehicle is being driven, increasing the risk of a crash.
Remedy
Nissan will notify owners, and dealers will modify the start/stop switch housing, free of charge. The recall began on August 4, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
On certain vehicles, the side curtain airbag inflator(s) could rupture and separate unexpectedly. As a result, a piece of metal from the inflator could be propelled toward vehicle occupants with or without the airbag(s) deploying. This could also cause the side curtain airbag(s) not to inflate properly in a crash.
Note: This is an expansion of Transport Canada recall no. 2024-241.
Safety Risk
An airbag inflator that ruptures can create a risk of injury. Additionally, an airbag that doesn't inflate properly could increase the risk of injury in a crash.
Remedy
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the side curtain airbag(s), as necessary.
On certain vehicles, the driver's side air bag may not deploy as designed, resulting in reduced capability of the air bag to protect the driver. In addition, the air bag inflator may fracture. If this were to occur, pieces of the inflator could strike and injure the vehicle occupants.
Safety Risk
No risk description available.
Remedy
Dealer will inspect, and if necessary, install a new driver's air bag.
28 vehicles affectedMfr ref: 03008Updated June 10, 2026
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Note: This is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall.
Safety Risk
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Remedy
Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2014 Suzuki DL1000 motorcycles manufactured January 17, 2014 to June 5, 2014, and 2015 Suzuki DL1000 motorcycles manufactured November 5, 2014, to February 6, 2015. Due to corrosion or being attached to the painted engine case, the battery ground connection may have poor electrical conductivity.
Safety Risk
As a result of the poor conductivity, the engine may stall and be unable to be restarted, increasing the risk of a crash.
Remedy
Suzuki will notify owners, and dealers will relocate the battery ground connection to an unpainted surface and replace the ground wire protector with a high-heat resistance tube, free of charge. The recall began on January 29, 2016. Owners may contact Suzuki customer service number at 1-714-996-7040. Suzuki's number for this recall is 2A53.
2,404 vehicles affectedMfr ref: 2A53Updated June 10, 2026
ON SOME HEAVY DUTY CLASS 8 VEHICLES EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS, THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS.
Safety Risk
IF THIS CONDITION OCCURS, THE DRIVER CAN LOSE STEERING CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
Remedy
DEALERS WILL REPLACE THE BALL SOCKET ASSEMBLIES. THIS CAMPAIGN SUPERSEDES NHTSA CAMPAIGN NOS. 01V-139.001 AND 02V-037.002. OWNER NOTIFICATION BEGAN JULY 25, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT VOLVO TRUCKS AT 1-800-528-6586.
On certain vehicles, the steering intermediate shaft pot coupling may have an oversized serration diameter in the attachment area of the steering gear shaft or steering column. The attachment may loosen resulting in steering freeplay with a possible loss of steering control.
FCA US LLC (Chrysler) is recalling certain model year 2009 Dodge Journey vehicles manufactured December 31, 2007, to August 31, 2008, 2008-2009 Dodge Grand Caravan and Chrysler Town and Country vehicles manufactured June 18, 2007, to August 31, 2008. In the affected vehicles, the air bag control units may corrode and fail.
Safety Risk
If the air bag control unit fails, the air bags may not deploy in the event of a crash, increasing the risk of occupant injury. Additionally, the air bags may inadvertently deploy, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the air bag control unit, free of charge. The recall began on December 6, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S07.
110,482 vehicles affectedMfr ref: S07Updated June 10, 2026
FCA US LLC (Chrysler) is recalling certain model year 2009 Dodge Journey vehicles manufactured December 31, 2007, to August 31, 2008, 2008-2009 Dodge Grand Caravan and Chrysler Town and Country vehicles manufactured June 18, 2007, to August 31, 2008. In the affected vehicles, the air bag control units may corrode and fail.
Safety Risk
If the air bag control unit fails, the air bags may not deploy in the event of a crash, increasing the risk of occupant injury. Additionally, the air bags may inadvertently deploy, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the air bag control unit, free of charge. The recall began on December 6, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S07.
110,482 vehicles affectedMfr ref: S07Updated June 10, 2026
FCA US LLC (Chrysler) is recalling certain model year 2009 Dodge Journey vehicles manufactured December 31, 2007, to August 31, 2008, 2008-2009 Dodge Grand Caravan and Chrysler Town and Country vehicles manufactured June 18, 2007, to August 31, 2008. In the affected vehicles, the air bag control units may corrode and fail.
Safety Risk
If the air bag control unit fails, the air bags may not deploy in the event of a crash, increasing the risk of occupant injury. Additionally, the air bags may inadvertently deploy, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the air bag control unit, free of charge. The recall began on December 6, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S07.
110,482 vehicles affectedMfr ref: S07Updated June 10, 2026
On certain vehicles, under ambient temperatures below -25 degrees Celsius, moisture can freeze in the fuel pressure regulator. As a result, fuel system pressure may increase at the time of engine start up, causing fuel loss at the fuel pipe/fuel hose connection. Fuel loss in the presence of an ignition source could result in a fire.
Safety Risk
No risk description available.
Remedy
For 1999-2000 model year vehicles, dealers will (1) replace the fuel pressure regulator & vacuum hose and change the system routing to accommodate use of a higher surge tank attachment location that will prevent water from being sucked into the fuel pressure regulator, and (2) replace the fuel delivery hose and replace the hose clamp with an improved clamp. For 2001 and later model year vehicles, dealers will only replace the fuel pressure regulator & vacuum hose and change the system routing as described above.
20,322 vehicles affectedMfr ref: 51Updated June 10, 2026
On certain vehicles, the wheel rims may have been manufactured incorrectly and could fail. A wheel separating from the vehicle could cause a loss of control and a crash. In addition, the errant wheel assembly could strike a vehicle, stationary object, or a bystander. These issues could result in property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and, if necessary, replace the wheel rims.
On certain vehicles, the wheel nuts may contain a manufacturing defect. The wheel nuts may crack and detach from the wheel hub stud when subjected to shock loading.
Safety Risk
No risk description available.
Remedy
Dealers will replace wheel nuts. Locking wheel nuts are not affected by this concern.
127 vehicles affectedMfr ref: P056Updated June 10, 2026
On certain motorcycles, the fuel pump retaining clips contain a surface defect. This defect creates a stress riser and can cause the retaining clip to fail. When the clip fails, the fuel pump is allowed to separate from the fuel regulator resulting in a loss of fuel pressure. This loss of fuel pressure can cause the engine to quit running unexpectedly.
Safety Risk
No risk description available.
Remedy
Dealers will replace the fuel pump retaining clip.
138 vehicles affectedMfr ref: V-06-03Updated June 10, 2026
BMW of North America, LLC (BMW) is recalling certain 2020 R1250GS and R1250RT motorcycles. The pivot pin that connects the final drive to the swing arm may be damaged, causing the connection between the final drive and swing arm to loosen.
Safety Risk
A loose connection between the final drive and swing arm will reduce stability and control, increasing the risk of a crash.
Remedy
Dealers will replace the pivot pin, free of charge. The motorcycles are not with owners at this time. The recall began April 28, 2020. Please contact BMW customer service number 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 R1250GS and R1250RT motorcycles. The pivot pin that connects the final drive to the swing arm may be damaged, causing the connection between the final drive and swing arm to loosen.
Safety Risk
A loose connection between the final drive and swing arm will reduce stability and control, increasing the risk of a crash.
Remedy
Dealers will replace the pivot pin, free of charge. The motorcycles are not with owners at this time. The recall began April 28, 2020. Please contact BMW customer service number 1-800-525-7417.
