CERTAIN SEDANS AND COUPES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." CERTAIN REAR SEAT BELT BUCKLES WERE IMPROPERLY MANUFACTURED.
Safety Risk
THE REAR SEAT BELTS WILL WORK PROPERLY AND PROVIDE PROTECTION IN A CRASH, BUT THE OWNER MAY EXPERIENCE DIFFICULTY UNFASTENING THE BELT AFTER THE CRASH.
Remedy
IN A PREVIOUS RECALL (01V-380), ONLY RIGHT AND LEFT BUCKLES WERE INSPECTED. THE REAR CENTER BUCKLE SHOULD ALSO BE INSPECTED AND CORRECTED IF NECESSARY. THIS RECALL IS BEING CONDUCTED ONLY FOR THE CENTER BUCKLE. DEALERS WILL INSPECT THE VEHICLES AND REPLACE THE SEAT BELT ASSEMBLIES THAT WERE IMRPOPERLY MANUFACTURED. ONLY BUCKLES THAT ARE MARKED (ON THE BACK SIDE OF THE BUCKLE) WITH AN ASSEMBLY NUMBER BEGINNING WITH 00185, 00186, OR 00187, WILL BE REPLACED. OWNERS SHOULD CONTACT THEIR DEALER FOR THIS REPLACEMENT. OWNER NOTIFICATION BEGAN MARCH 5, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009.
NOTE: CROWN VICTORIA POLICE INTERCEPTORS AND UNITS FOR COMMERCIAL APPLICATIONS. TOWN CARS WITH LIMOUSINE BUILDER PACKAGE OR TRAILER TOW PACKAGE. THE PITMAN ARMS ON THESE VEHICLES WERE NOT FULLY LUBRICATED DURING VEHICLE ASSEMBLY. IF NOT PROPERLY LUBRICATED IN ACCORDANCE WITH THE MAINTENANCE SCHEDULE, THE PITMAN ARM BALL JOINT MAY BECOME CONTAMINATED AND CORRODE. THIS COULD RESULT IN ABNORMAL WEAR AND POSSIBLE PITMAN ARM BALL JOINT SEPARATION CAUSING SUBSEQUENT LOSS OF STEERING CONTROL AND A POSSIBLE CRASH.
Safety Risk
No risk description available.
Remedy
PITMAN ARMS WILL BE INSPECTED AND THOSE WITH SIGNIFICANT WEAR WILL BE REPLACED. THOSE PITMAN ARMS NOT REPLACED WILL HAVE THE BALL JOINT FULLY GREASED.
2,786 vehicles affectedMfr ref: 96S45Updated June 10, 2026
FORD IS RECALLING CERTAIN MODEL YEAR 2010-2011 FORD FUSION AND MERCURY MILAN VEHICLES EQUIPPED WITH 17 INCH STEEL WHEELS AND BUILT FROM APRIL 1, 2009, THROUGH APRIL 30, 2009, AND FROM DECEMBER 1, 2009, THROUGH NOVEMBER 13, 2010. THE WHEEL STUDS MAY FRACTURE, POTENTIALLY CAUSING A WHEEL TO SEPARATE.
Safety Risk
WHILE DRIVING, MULTIPLE STUD FRACTURES COULD OCCUR AT THE WHEEL LOCATION, AND THE OPERATOR MAY EXPERIENCE VEHICLE VIBRATION AND/OR WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy
FORD WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE REAR BRAKE DISC SURFACE FOR FLATNESS AND REPLACE THE DISCS AS NECESSARY. ADDITIONALLY, THE WHEEL LUG NUTS WILL BE REPLACED ON ALL FOUR WHEELS. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT JANUARY 24, 2012. OWNERS MAY CONTACT THE FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
128,616 vehicles affectedMfr ref: 11S23Updated June 10, 2026
Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts and CMVSS 115 - Vehicle Identification Number (VIN). Excess bulkhead insulation material may have been used during manufacturing, and as a result, could extend into the lower area of the windshield. This excess insulation could cover the VIN label, and potentially affect bonding of the windshield. If the windshield bonding is affected on the passenger side, in the event of a crash (where passenger frontal airbag deployment is warranted), the airbag may not deploy as designed, which would fail to meet the requirements of the standard, and increase the risk of injury in a crash.
Safety Risk
No risk description available.
Remedy
Dealers will inspect the bulkhead insulation for excess material and remove it as necessary. In the event of compromised windshield bonding, the bonding will be reworked.
ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH ELECTRONIC STABILITY PROGRAM (ESP), THE YAW RATE SENSOR MAY BECOME TOO SENSITIVE AND MAY RECALIBRATE INACCURATELY. WHILE DRIVING THE ESP PROGRAM MAY CAUSE THE ENGINE TO REDUCE POWER AND MAY CAUSE A BRAKE AT ONE OF THE WHEELS TO BE INAPPROPRIATELY.
Safety Risk
BRAKE APPLICATION CAUSED BY INADVERTENT ESP ACTIVATION MAY RESULT IN LOSS OF CONTROL AND A CRASH.
Remedy
DEALERS WILL REPROGRAM THE ESP HYDRAULIC ELECTRONIC CONTROL UNIT. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2005. OWNERS MAY CONTACT HYUNDAI DE PUERTO RICO AT 1-800-981-0188.
On certain vehicles, the edge of the seat belt retractor bracket on the third-row seat may contact the seat belt webbing during certain operating conditions. As a result, the seat belt may not properly restrain third-row seat occupants during a crash, increasing the risk of personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will install a plastic cover on the retractor bracket at both third-row seating positions.
1,399 vehicles affectedMfr ref: F04Updated June 10, 2026
On certain motorcycles, prolonged high-RPM operation could cause the air induction hose to melt, resulting in hot exhaust gases being directed at the fuel injection sub-wiring harness, which could melt the insulation and cause the wiring to short. If this were to occur, the fuel injection system would malfunction, which could result in an engine stall and could increase the risk of a crash causing injury and/or damage to property.
Safety Risk
No risk description available.
Remedy
Dealers will replace the air induction hose, air induction pipe and air induction cut-off valve with ones that meet the new specifications.
732 vehicles affectedMfr ref: M14-076Updated June 10, 2026
BMW of North America, LLC (BMW) is recalling certain 2019-2020 330i, 330i xDrive, and 2019 Z4 vehicles. The needle roller bearings of the counterbalance shafts may have been improperly installed, potentially causing the counterbalance shaft to loosen.
Safety Risk
If the counterbalance shaft loosens, severe engine damage could occur, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the engine, free of charge. The recall began December 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2020 330i, 330i xDrive, and 2019 Z4 vehicles. The needle roller bearings of the counterbalance shafts may have been improperly installed, potentially causing the counterbalance shaft to loosen.
Safety Risk
If the counterbalance shaft loosens, severe engine damage could occur, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the engine, free of charge. The recall began December 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
THIS RECALL APPLIES TO CERTAIN PASSENGER VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. CERTAIN REAR SUSPENSION SUBFRAME COMPONENTS WERE PRODUCED WITH POOR PAINT QUALITY WHICH, AFTER CONTINUED EXPOSURE TO CORROSIVE ROAD SALTS FOR A PERIOD OF SEVERAL YEARS, COULD RESULT IN RUST-OUT OF THE COMPONENT AND POSSIBLE BREAKAGE OF THE SUBFRAME.
Safety Risk
IF SUCH BREAKAGE OCCURS WHILE THE VEHICLE IS BEING OPERATED, CONTROL OF THE VEHICLE COULD BE AFFECTED, INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL CLEAN AND RUST-PROOF THE REAR SUSPENSION SUBFRAME. OWNER NOTIFICATION BEGAN JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SUBARU AT 1-800-782-2783.
On certain vehicles, the engine crankshaft pulley bolt may have been manufactured improperly. This could cause it to crack and fail. If this happens, the crankshaft could break and cause a sudden engine failure. A driver may hear loud noises and see warning lights on the dash immediately before the engine fails.
Safety Risk
An engine failure could increase the risk of a crash. Additionally, a loose pulley could separate from the engine and cause damage. If it separates from the vehicle, it could become a hazard for bystanders or other drivers.
Remedy
The company will notify owners by mail. Owners will be instructed to take their vehicle to an authorized repair facility to have the crankshaft pulley bolt replaced with a new one.
59 vehicles affectedMfr ref: H181Updated June 10, 2026
Tesla Motors, Inc. (Tesla) is recalling certain model year 2013 Model S electric vehicles manufactured May 10, 2013, through June 8, 2013. An improper method for aligning the left hand seat back striker to the bracket may have weakened the weld between the bracket and the frame of the vehicle.
Safety Risk
In the event of a crash, the left hand seat back may not stay mounted, increasing the risk of injury to passengers.
Remedy
Tesla will notify owners, and Tesla Service Centers will inspect the left hand second row strikers. Tesla will add additional mounting hardware to ensure a proper joint between the bracket and the frame, free of charge. The recall began on June 24, 2013. Owners may contact Tesla at 1-650-681-5000.
Certain vehicles may have incorrect payload information on the vehicle certification label. The payload shown on the label is greater than the maximum validated payload. If the vehicle is loaded to the incorrectly labeled payload, it may not ride and handle in the manner expected by the operator and could lead to loss of vehicle control and and/or an inability to stop the vehicle within expected stopping distances.
Safety Risk
No risk description available.
Remedy
Dealers will install a new label, directing operators to their owner's manual for payload information.
10,752 vehicles affectedMfr ref: 00063Updated June 10, 2026
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts and CMVSS 214 - Side Impact Protection. The airbag (SRS) control unit may incorrectly detect a fault in one or more of the front or side airbag impact sensors during vehicle start up. In the event of a crash where airbag deployment is required, this may result in the airbags not deploying as designed, increasing the risk of injury. Upon detection of a fault in the airbag system, multiple warning lights would activate, a warning buzzer would sound, and a warning message would display on the instrument panel display.
Safety Risk
No risk description available.
Remedy
Dealers will update the airbag control unit software.
15,774 vehicles affectedMfr ref: SRC R67Updated June 10, 2026
Certain motorcycles were built with an isolator mount system that could lose clamp load. Should this condition occur, it may allow the engine to move unexpectedly within the frame and cause unintended distraction to the operator, which could result in an accident.
Safety Risk
No risk description available.
Remedy
Front isolator system will be replaced on affected vehicles.
177 vehicles affectedMfr ref: 0810Updated June 10, 2026
Hyundai Motor America (Hyundai) is recalling certain 2011-2014 Sonata and 2013-2014 Santa Fe Sport vehicles previously repaired under recall numbers 15V-568 and 17V-226. The high pressure fuel pipe that connects to the fuel pump outlet may have been damaged, misaligned, or improperly torqued during the engine replacement procedure, allowing fuel to leak from the pipe.
Safety Risk
A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy
Hyundai will notify owners, and dealers will inspect and replace the fuel pipe, as necessary, free of charge. The recall began March 1, 2019. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's recall number for this recall is 180.
150,730 vehicles affectedMfr ref: 180Updated June 10, 2026
Hyundai Motor America (Hyundai) is recalling certain 2011-2014 Sonata and 2013-2014 Santa Fe Sport vehicles previously repaired under recall numbers 15V-568 and 17V-226. The high pressure fuel pipe that connects to the fuel pump outlet may have been damaged, misaligned, or improperly torqued during the engine replacement procedure, allowing fuel to leak from the pipe.
Safety Risk
A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy
Hyundai will notify owners, and dealers will inspect and replace the fuel pipe, as necessary, free of charge. The recall began March 1, 2019. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's recall number for this recall is 180.
150,730 vehicles affectedMfr ref: 180Updated June 10, 2026
On certain vehicles, an assembly jig modification resulted in an increase of clearance between the latch and striker of the back door lock such that there is insufficient engagement of the latch and striker to prevent the back door from opening while the vehicle is in motion.
Volkswagen Group of America, Inc. (Volkswagen) is recalling two 2018 Golf GTI vehicles. The VIN printed on the Federal Certification label may not match the actual VIN on the vehicle. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."
Safety Risk
If the stamped vehicle identification number (VIN) does not match the VIN on the Vehicle Certification Label, owners may be unable to tell if their vehicle is under an important safety recall, possibly exposing them to an increased risk of a crash, fire or injury.
Remedy
Volkswagen will notify owners, and dealers will install a correct certification label, free of charge. This recall began July 9, 2020. Owners may contact Volkswagen customer service at 1-800-893-5298. Volkswagen's number for this recall is 01E7.
2 vehicles affectedMfr ref: 01E7Updated June 10, 2026
