Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
4,815,661 vehicles affectedMfr ref: U49,U59-U65,U68,U73Updated June 10, 2026
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Safety Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
BRP IS RECALLING CERTAIN MODEL YEAR 2010 SEA-DOO ADVANCED TEC TRAILERS MANUFACTURED FROM DECEMBER 10, 2009 THROUGH MARCH 22, 2010. THE LATCHING MECHANISM OF A SEA-DOO PERSONAL WATERCRAFT TO AN ADVANCED TEC TRAILER (KNOWN AS THE iCATCH) MAY BE MISADJUSTED AND NOT PROPERLY SECURE THE FRONT END OF THE PERSONAL WATERCRAFT BEING TRANSPORTED. WHEN THIS CONDITION EXISTS, IT IS POSSIBLE THAT ROAD OSCILLATIONS CAUSE THE PERSONAL WATERCRAFT TO JUMP OUT OF THE iCATCH HOOK PART OF THE MECHANISM.
Safety Risk
IF THE REAR LATCHING STRAPS ARE NOT USED TO PROPERLY SECURE THE BACK END OF THE PERSONAL WATERCRAFT, IT MAY SLIDE OFF THE TRAILER INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL INSTALL A SAFETY CABLE ON THE FRONT LATCH MECHANISM, TO AFFIX AN UPDATED LABEL ON THE TRAILER AND TO GIVE TO THE OWNER AN UPDATED USER GUIDE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JUNE 15, 2010. OWNERS MAY CONTACT BRP AT 1-888-638-5397.
On certain vehicles, the connection securing the cable from the 48 V battery to the starter-generator may not have been tightened properly. As a result, the connection could loosen and cause a short circuit and/or a loss of power to the wheels.
Note: This recall only affects certain vehicles equipped with a 2.0L engine.
Safety Risk
A short circuit could increase the risk of a fire. A loss of power to the wheels could increase the risk of a crash.
Remedy
BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, tighten the nuts. The dealer will replace the 48 V battery cable and/or the starter-generator, as necessary.
27 vehicles affectedMfr ref: 12 81 25RCUpdated June 10, 2026
TIRE DESCRIPTION: FIRESTONE WILDERNESS AT, SIZE P235/75R15, PRODUCED AT THE DECATUR, ILLINOIS TIRE PLANT AND ALL FIRESTONE RADIAL ATX AND RADIAL ATX II TIRES, SIZE P235/75R15. OPERATION OF THESE TIRES AT LOW INFLATION PRESSURES, HIGH SPEED, AND IN HOT WEATHER, CAN CONTRIBUTE TO SEPARATION OF THE TIRE TREAD.
Safety Risk
IF THE TREAD SEPARATES FROM THE TIRE, THE DRIVER CAN LOSE CONTROL OF THE VEHICLE, POSSIBLY RESULTING IN A CRASH CAUSING INJURY OR DEATH.
Remedy
THE REPLACEMENT/REIMBURSEMENT PROGRAM FOR THIS CAMPAIGN EXPIRED ON AUGUST 29, 2001. HOWEVER, CUSTOMERS SHOULD CONTACT FIRESTONE CUSTOMER SERVICE AT 1-800-465-1904 FOR POSSIBLE ASSISTANCE.
On certain vehicles, a low-voltage condition caused by a loose battery connection or a low battery could cause a problem with the Transmission Control Module (TCM). If this happens, the transmission could shift to Park (P) while driving. This could cause damage to the transmission park pawl. As a result, when the transmission is shifted to P, the vehicle could move if the parking brake is not applied.
Safety Risk
A damaged transmission could allow a parked vehicle to move if the parking brake is not applied. This could increase the risk of a crash.
Remedy
Honda will mail a letter to owners asking them to take their vehicle to a Honda Automobile dealer. The dealer will ensure the battery terminals are secure and update the TCM with the latest software. If the parking gear cannot hold the vehicle in Park without application of the electronic parking brake, the transmission will be replaced.
6,540 vehicles affectedMfr ref: N88 & N89Updated June 10, 2026
On certain vehicles, a lubrication hole within the 6-speed manual transmission transfer case was not drilled during machining process. This could lead to premature wear or breakage of third gear. If the third gear breaks while the vehicle is in motion a loss of power to the drive wheels will occur, which may result in a vehicle crash.
Safety Risk
No risk description available.
Remedy
Dealers will drill an oil lubrication hole in the transfer case and, if necessary, replace internal components.
102 vehicles affectedMfr ref: WVS-29Updated June 10, 2026
IF THE SECONDARY HOOD LATCH LEVER IS MISTAKENLY OPERATED IN THE INCORRECT DIRECTION, THERE IS A POSSIBILITY OF DAMAGE TO THE HOOD LATCH ASSEMBLY EVENTUALLY RESULTING IN SEPARATION OF THE SECONDARY HOOD LATCH. UNDER THIS CONDITION, IF THE PRIMARY LATCH IS NOT FULLY ENGAGED, OR IS RELEASED WHILE DRIVING, THE HOOD MAY OPEN, OBSTRUCTING FRONTAL VISION AND A VEHICLE CRASH COULD OCCUR.
Safety Risk
No risk description available.
Remedy
No remedy description available.
8,206 vehicles affectedMfr ref: R20Updated June 10, 2026
On certain vehicles, a defect in the the ball joint seals on the drag link could allow corrosion to form in the joint, leading to accelerated wear. This could result in ball joint failure, potentially resulting in a loss of steering control which could increase the risk of a crash causing injury and/or damage to property.
Safety Risk
No risk description available.
Remedy
Dealers will inspect the drag link on affected vehicles. Those found to be loose will be replaced immediately. Drag links found to be still serviceable will be replaced when sufficient replacement parts become available.
958 vehicles affectedMfr ref: RVXX1508Updated June 10, 2026
THE NUT ATTACHING THE STEERING WHEEL MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING INSTALLATION. THIS COULD ALLOW THE STEERING WHEEL TO SEPARATE FROM THE STEERING COLUMN. SHOULD THIS HAPPEN WHILE THE VEHICLE IS IN MOTION, A CRASH COULD OCCUR WITHOUT PRIOR WARNING.
Safety Risk
No risk description available.
Remedy
STEERING WHEEL NUT WILL BE CHECKED AND TORQUED TO SPECIFICATION IF NECESSARY.
5,858 vehicles affectedMfr ref: 1D11/91030Updated June 10, 2026
On certain vehicles, the secondary shaft bearing in the automatic transmission may fail. This could cause abnormal noise, the malfunction indicator lamp to turn ON, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission, resulting in a short circuit that causes the engine to stall. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Additionally, broken pieces may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the PARK position. These issues could result in property damage and/or personal injury.
Safety Risk
No risk description available.
Remedy
Dealers will update the automatic transmission control module software.
135,142 vehicles affectedMfr ref: HL27, HL24Updated June 10, 2026
On certain motorcycles, the front wheel may contain casting flaws that could lead to a possible failure of the wheel, creating the possibility of an accident resulting in injury or death.
On certain motorcycles, if the bolts holding the exhaust system are allowed to loosen, the bracket holding the mufflers can break. If this occurs, the broken bracket and the mufflers could fall loose from the motorcycle, damaging or pulling loose the rear hydraulic brake hose, causing loss of rear brake performance. The loose muffler parts could also present a traffic hazard for those around the motorcycle. Additionally, the rider could be distracted as the mufflers fall loose, leading to a crash.
Safety Risk
No risk description available.
Remedy
Dealers will install a new muffler bracket.
2,100 vehicles affectedMfr ref: M01-039Updated June 10, 2026
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2004-2006 Toyota Scion xA vehicles. The air bag control module for the supplemental restraint system (SRS ECU) may experience an internal short, possibly causing the air bags to unintentionally deploy, or become deactivated.
Safety Risk
If the air bags and/or seat belt pretensioners unintentionally deploy, it can increase the risk of a crash. If the air bags and/or seat belt pretensioners are deactivated, it can increase the risk of injury in the event of a crash.
Remedy
Toyota will notify owners, and dealers will inspect the SRS ECU, and if necessary, replace the air bag control module, free of charge. The recall began December 21, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0W.
16,992 vehicles affectedMfr ref: J0WUpdated June 10, 2026
On certain vehicles, corrosion within the exhaust channel of the intake manifold may occur and lead to leakage of exhaust gas. This situation could result in possible damage to the fuel return line and heat damage to the insulation at the front wall and under specific circumstances a possible risk of fire causing property damage and personal injury.
1976 PLYMOUTH VALIANT AND DODGE DART PASSENGER CARS. VEHICLES WERE BUILT WITH A POTENTIALLY DEFECTIVE PROJECTION WELDING OF THE STEERING BRACKET TO STEERING COLUMN HOUSING.
A MANUFACTURING CONDITION IN THE THROTTLE BODY INJECTOR (TBI) UNIT MIGHT OCCUR TO ALLOW THE THROTTLE CAM LEVER TO DISENGAGE FROM THE THROTTLE DRIVE SHAFT.
Safety Risk
IF THE THROTTLE CAM LEVER DISENGAGES FROM THE THROTTLEDRIVE SHAFT, THE ENGINE COULD GO TO WIDE OPEN THROTTLE WITHOUT PRIOR WARNING.THIS LOSS OF VEHICLE ACCELERATOR CONTROL COULD RESULT IN A VEHICLE CRASH.
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive50, iX M60, i4 eDrive40, i4 M50, and 2023 i760 xDrive hybrid electric vehicles. The high voltage battery combined charging unit (CCU) may not have been manufactured correctly, resulting in improperly connected and/or assembled components inside the CCU.
Safety Risk
An improperly connected or assembled CCU can interrupt electrical power while driving and result in an engine stall, increasing the risk of a crash.
Remedy
Dealers will replace the high voltage battery combined charging unit (CCU), free of charge. Owner notification letters were mailed August 23, 2023. Owners may contact BMW customer service at 1-800-525-7417.
