THE RIGHT FRONT DOOR MAY FAIL TO FULLY LATCH, CAUSING THE DOOR TO "BOUNCE" BACK OFF OF THE DOOR SEALS. THIS CONDITION COULD LEAD TO INADVERTENT OPENING OF THE DOOR WHICH WOULD PUT AN OCCUPANT SEATED NEXT TO THE DOOR AT RISK OF HARM.
Safety Risk
No risk description available.
Remedy
AN EXTENDED LENGTH LATCH MOUNTING FASTENER WILL BE INSTALLED TO ASSURE PROPER ORIENTATION OF THE RIGHT FRONT DOOR LATCH RELATIVE TO THE MOUNTING LEG OF THE ADJACENT WINDOW FRAME. IN SOME CASES WHERE LATCH LOADS HAVE BEEN EXCESSIVE, REPLACEMENT OF THE LATCH MAY BE REQUIRED.
566 vehicles affectedMfr ref: D456Updated June 10, 2026
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE LOWER PIVOT PIN THAT JOINS THE LIFTGATE GAS STRUT TO THE BODY CAN SEPARATE FROM THE LOWER STRUT MOUNTING BRACKET DUE TO AN UNDERSIZED RIVET HEAD.
Safety Risk
PIVOT PIN SEPARATION CAUSES THE LIFTGATE TO DESCEND SUDDENLY, RESULTING IN AN INJURY IF SOMEONE IS STRUCK BY THE LIFTGATE.
Remedy
REPLACE LIFTGATE STRUT ASSEMBLIES HAVING UNDERSIZED PIVOT PIN RIVET HEAD DIAMETERS WITH ASSEMBLIES WITH ADEQUATE PIVOT PIN RIVET HEADS.
Chrysler (FCA US, LLC) is recalling certain 2021-2023 Jeep Renegade vehicles. The incorrect bumper reverse light assembly may have been installed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Safety Risk
The incorrect reverse lights may have reduced visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the bumper reverse light assembly, as necessary, free of charge. Owner notification letters were mailed January 30, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is D7B.
2,135 vehicles affectedMfr ref: D7BUpdated June 10, 2026
On certain vehicles equipped with a water channel located underneath the cowl louver at the base of the windshield and above the windshield wiper link assembly, due to stresses applied to the water channel during the manufacturing process, a section of the channel in some vehicles may become deformed and prevent water from draining properly. If water were to collect in the channel, it may drip onto the joint that connects the windshield wiper link and wiper motor. Over time, water dripping on this joint could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link from the wiper motor crank arm. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property.
Safety Risk
No risk description available.
Remedy
Dealers will replace the water channel, the wiper link and wiper motor crank arm with ones of an improved design.
93,652 vehicles affectedMfr ref: SRC R09Updated June 10, 2026
On a small number of vehicles, the cargo partition wall may not be attached properly. As a result, the wall could move or detach in a crash and cause the cargo to move inside the vehicle.
Safety Risk
Cargo that moves in a crash could create a risk of injury.
Remedy
Mercedes-Benz will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, secure the cargo partition wall with additional fasteners.
3 vehicles affectedMfr ref: 7190002Updated June 10, 2026
BENTLEY IS RECALLING CERTAIN MODEL YEAR 2007-2009 ARNAGER, ARNAGET, ARNAGE RL, BROOKLANDS, AND AZURE VEHICLES. THERE IS A POTENTIAL FOR THE "B" HOOD ORNAMENT'S RETRACTING MECHANISM TO BECOME CORRODED. THIS MAY LEAD TO THE "B" HOOD ORNAMENT NOT RETRACTING AS INTENDED WHEN A VEHICLE IS INVOLVED IN A CRASH.
Safety Risk
IF THE HOOD ORNAMENT DOES NOT RETRACT, IT COULD INCREASE THE RISK OF INJURY TO A PEDESTRIAN IN THE EVENT OF A CRASH BETWEEN THE VEHICLE AND THE PEDESTRIAN.
Remedy
DEALERS WILL REPLACE THE RETRACTABLE "B" MECHANISM FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 27, 2010. OWNERS MAY CONTACT BENTLEY AT 1-617-488-8500.
630 vehicles affectedMfr ref: RE10/04Updated June 10, 2026
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The longitudinal frame members may be missing reinforcement fasteners, reducing vehicle stability and decreasing the structural integrity of the third-row seats.
Safety Risk
Reduced stability increases the risk of a crash. Additionally, the third-row seat mountings can fail, increasing the risk of injury during a crash.
Remedy
Dealers will inspect and repair the frame members as necessary, free of charge. Owner notification letters were mailed March 4, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3ROHRAH.
3,739 vehicles affectedMfr ref: VS3ROHRAHUpdated June 10, 2026
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The longitudinal frame members may be missing reinforcement fasteners, reducing vehicle stability and decreasing the structural integrity of the third-row seats.
Safety Risk
Reduced stability increases the risk of a crash. Additionally, the third-row seat mountings can fail, increasing the risk of injury during a crash.
Remedy
Dealers will inspect and repair the frame members as necessary, free of charge. Owner notification letters were mailed March 4, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3ROHRAH.
3,739 vehicles affectedMfr ref: VS3ROHRAHUpdated June 10, 2026
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The longitudinal frame members may be missing reinforcement fasteners, reducing vehicle stability and decreasing the structural integrity of the third-row seats.
Safety Risk
Reduced stability increases the risk of a crash. Additionally, the third-row seat mountings can fail, increasing the risk of injury during a crash.
Remedy
Dealers will inspect and repair the frame members as necessary, free of charge. Owner notification letters were mailed March 4, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3ROHRAH.
3,739 vehicles affectedMfr ref: VS3ROHRAHUpdated June 10, 2026
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The longitudinal frame members may be missing reinforcement fasteners, reducing vehicle stability and decreasing the structural integrity of the third-row seats.
Safety Risk
Reduced stability increases the risk of a crash. Additionally, the third-row seat mountings can fail, increasing the risk of injury during a crash.
Remedy
Dealers will inspect and repair the frame members as necessary, free of charge. Owner notification letters were mailed March 4, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3ROHRAH.
3,739 vehicles affectedMfr ref: VS3ROHRAHUpdated June 10, 2026
THE BOLTS SECURING THE FRONT HOOD LATCH MAY LOSE THEIR SPECIFIED FASTENING TORQUE OVER TIME. SHOULD THIS HAPPEN, THE LATCH COULD MOVE OUT OF ITS DESIGN POSITION AND CAUSE DISENGAGEMENT OF THE HOOD STRIKER FROM THE LATCH. IN SOME VEHICLES THE LATCH MAY NOT HAVE BEEN PROPERLY ALIGNED DURING PRODUCTION. REPEATED OPENING AND CLOSING OF THE HOOD WITH AN IMPROPERLY ALIGNED LATCH COULD RESULT IN DAMAGE TO THE LATCH. EITHER CONDITION COULD RESULT IN HOOD FLY UP AND OBSTRUCTION OF THE DRIVER'S VISION.
Safety Risk
No risk description available.
Remedy
HOOD LATCHES AND SECURING BOLTS WILL BE INSPECTED AND REPLACED IF NECESSARY.
64,460 vehicles affectedMfr ref: UCUpdated June 10, 2026
On certain vehicles, the windshield may not be properly attached. As a result, the glass can become loose and could separate from the vehicle in a crash.
Safety Risk
A windshield that detaches in a crash could create an increased risk of injury.
Remedy
Ford will notify owners by mail and instruct you to take your vehicle to a dealer to remove and reinstall the windshield.
3,178 vehicles affectedMfr ref: 21C22Updated June 10, 2026
Lamborghini (Automobili Lamborghini) is recalling certain 2018-2021 Aventador SVJ Coupe vehicles. The hood hinge screws may loosen, possibly resulting in an unlatched hood. This may cause the hood to detach from the vehicle in certain, high-speed driving conditions.
Safety Risk
A detached hood can create a road hazard and increase the risk of a crash.
Remedy
Lamborghini will notify owners, and dealers will replace the hood hinge screws, free of charge. The recall began April 9, 2021. Owners may contact Automobili Lamborghini customer service at 1-866-681-6276. Automobili Lamborghini's number for this recall is L734-R.01.21.
221 vehicles affectedMfr ref: L734-R.01.21Updated June 10, 2026
On certain vehicles, door latch screws could loosen over time, causing the door(s) to fail to latch when closed and illuminating the door ajar warning light. If the vehicle is driven in this condition, the door(s) could open while the vehicle is in motion, increasing the risk of an accident causing injury and/or property damage.
Safety Risk
No risk description available.
Remedy
Dealers will inspect and re-tighten or replace the latch screws.
On certain vehicles, two of the cosmetic roof trims may not be properly attached. This includes the cosmetic roof trim just behind the top of the windshield and the spine cosmetic roof trim between the rear doors. Over time, these cosmetic roof trims could loosen and separate from the vehicle.
Safety Risk
Cosmetic roof trims that detach from a moving vehicle could create a road hazard for others and increase the risk of a crash.
Remedy
Tesla will notify owners by mail and advise you to contact Tesla Service to arrange for a no-charge inspection of your vehicle. If the cosmetic roof trims are not properly attached, they will be re-installed.
431 vehicles affectedMfr ref: SB-20-12-005Updated June 10, 2026
Certain vehicles built without 3rd row seats fail to comply with the requirements of Canada Motor Vehicle Safety Standard 210.1 - User-ready Tether Anchorages for Restraint Systems. The tether anchors are located at the base of the second row seat frames, and are covered by a cargo management load floor system. The cargo management load floor system is not marked with pictograms identifying the location of the tether anchors, which is contrary to the requirements of the standard.
Safety Risk
No risk description available.
Remedy
Dealers will replace the cargo management load floor with one that has the required identification symbol.
121 vehicles affectedMfr ref: 15C01Updated June 10, 2026
On certain vehicles, the window trim on the rear doors may not be properly attached. As a result, the window trim could loosen and separate from the vehicle.
Note: This is an expansion of Transport Canada Recall 2022-509
Safety Risk
Window trim that detaches from the vehicle could create a road hazard for others and increase the risk of a crash.
Remedy
Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealership to inspect the window trim on the rear doors and repair them, if necessary.
6,870 vehicles affectedMfr ref: 7490001Updated June 10, 2026
Ford Motor Company (Ford) is recalling certain 2017 GT vehicles previously repaired incorrectly under recall 18V707. The rear wing valve block may leak hydraulic fluid.
Safety Risk
A hydraulic fluid leak in the presence of an ignition source can increase the risk of a fire.
Remedy
Dealers will update the dynamics control module software and replace the rear wing check valve as necessary, free of charge. Owner notification letters were mailed August 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S74.
2 vehicles affectedMfr ref: 25S74Updated June 10, 2026
THIS VEHICLE MAY HAVE UNDERSIZED WELDS ON THE BRACKET THAT ATTACHES THE LIFTGATE ASSIST GAS CYLINDER TO THE RIGHT HAND BODYSIDE OUTER PANEL. THIS COULD RESULT IN BRACKET SEPARATION WHICH COULD PREVENT THE GAS CYLINDER FROM PROPERLY SUPPORTING THE LIFTGATE.
Safety Risk
No risk description available.
Remedy
BRACKET ATTACHMENT WILL BE REINFORCED WITH TWO POP RIVETS.
1 vehicles affectedMfr ref: 97S78Updated June 10, 2026
